Installation manual

6
Note If other messages appear, see the troubleshooting
sections in the HP JetDirect administrator’s guide
provided on the HP JetDirect CD-ROM.
For HP J3113A 10/100Base-TX cards, see appendix
A
in this manual for special troubleshooting
information.
6. Configure the Card for Network Operation.
You can use the installation and
configuration software on the
HP JetDirect CD-ROM, or
download it from the World
Wide Web.
Refer to the HP JetDirect
administrator’s guide (supplied
electronically on the CD-ROM).
For many HP printers, you can use
the printer’s control panel to
configure basic network
parameters.
Refer to chapter 3
in this guide.
If the JetDirect card has been
configured with an IP address, you
can use a supported Web Browser
for advanced configuration.
Refer to chapter 4
in this guide.
S00eiohw.book Page 6 Thursday, February 24, 2000 2:26 PM