User Guide
© Copyright 2012 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Starting right ................................................................................................................................................... 1 Best practices ....................................................................................................................................... 1 Fun things to do .................................................................................................................................... 1 More HP resources ....
Using audio ........................................................................................................................................ 21 Connecting speakers ......................................................................................................... 21 Connecting headphones .................................................................................................... 21 Connecting a microphone .................................................................................
Managing and sharing information ............................................................................................................. 37 Using a USB device ........................................................................................................................... 37 Connecting a USB device .................................................................................................. 37 Removing a USB device ......................................................................
Changing the language of Setup Utility ............................................................................. 56 Navigating and selecting in Setup Utility ............................................................................ 56 Displaying system information ........................................................................................... 57 Restoring factory default settings in Setup Utility .............................................................. 57 Exiting Setup Utility .....
14 Electrostatic Discharge .............................................................................................................................. 70 Index ...................................................................................................................................................................
x
1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. To get the most out of your computer, read this chapter to learn about best practices after setup, fun things to do with your computer, and where to go to get more HP resources. Best practices To protect your smart investment, after you set up and register the computer, we recommend the following steps: ● If you haven’t already done so, connect to a wired or wireless network.
Resource Contents Safety & Comfort Guide ● Proper workstation setup. To access this guide, double-click the HP Documents icon located on the desktop., or go to http://www.hp.com/ergo. ● Guidelines for posture and work habits that increase your comfort and decrease your risk of injury. ● Electrical and mechanical safety information. Worldwide support ● Chat online with an HP technician. To get support in your language, go to www.hp.com/ support.
2 Getting to know your computer Finding your hardware and software information ▲ Click the Computer icon. Then select System Monitor and click the Hardware tab. A list displays all the devices installed in your computer, including optical drives, solid-state drives (SSD), or a secondary hard drive. To find out what software is included on your computer, select Computer > More Applications. Front Component (1) Description Speakers Produce sound.
Component (5) Description AC adapter light ● White: The AC adapter is connected and the battery is charged. ● Amber: The AC adapter is connected and the battery is charging. ● Off: The computer is using DC power. (6) Power connector Connects an AC adapter. (7) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen.
Left side Component Description (1) External monitor port Connects an external VGA monitor or projector. (2) Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (3) RJ-45 (network) jack Connects a network cable.
Component (8) 6 Description Digital Media Slot Supports the following digital card formats: ● Secure Digital (SD) Memory Card ● Secure Digital Extended Capacity (SDxC) Memory Card ● Secure Digital High Capacity (SDHC) Memory Card ● MultiMediaCard (MMC) (9) Hard drive light Blinking white: The hard drive is being accessed. (10) Power light ● White: The AC adapter is connected and the battery is charged. ● Blinking white: The computer is in the Suspend state, which is an energysaving mode.
Display Component Description (1) WLAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless local area networks (WLANs). (2) Internal microphone Record sound. (3) Webcam Records video, captures still photographs, and allows video conferences and online chat by means of streaming video. For details about using your webcam, click the Help menu in the pre-installed webcam software (Cheese).
Top TouchPad Component 8 Description (1) TouchPad on/off button Turns the TouchPad on or off. (2) TouchPad zone Moves the on-screen pointer and selects or activates items on the screen. (3) Left TouchPad button Functions like the left button on an external mouse. (4) Right TouchPad button Functions like the right button on an external mouse.
Lights Component Description (1) Caps lock light On: Caps lock is on, which switches the keys to all capital letters. (2) Power light ● White: The computer is on. ● Blinking white: The computer is in the Suspend state, which is an energy-saving mode. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation. Hibernation is an energy-saving mode that uses the least amount of power.
Buttons and speakers Component (1) Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Suspend. ● When the computer is in the Suspend state, press the button briefly to exit Suspend. ● When the computer is in Hibernation, press the button down briefly to exit Hibernation. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information.
Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Used in conjunction with hotkeys. (3) Operating system logo key Displays the operating system menu. (4) Action keys Execute frequently used system functions. (5) Operating system applications key Displays a shortcut menu for items beneath the cursor.
Bottom Component Description (1) Battery bay Holds the battery. (2) Vents (4) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. (3) 12 Chapter 2 Getting to know your computer Battery release latch Releases the battery from the battery bay.
Component Description (4) (5) Wireless compartment, and memory module compartment, keyboard screw, and optical drive bay. The service door provides access to the wireless compartment, memory module compartment, keyboard access screw, and optical drive bay, Hard drive bay The hard drive cover provides access to the hard drive bay.
Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer. 14 ● Regulatory label—Provides regulatory information about the computer. The regulatory label is affixed inside the battery bay. ● Wireless certification label or labels—Provide information about optional wireless devices and the approval markings of some of the countries or regions in which the devices have been approved for use.
3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Wireless technology transfers data across radio waves instead of wires.
Using operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, manage wireless networks, and diagnose and repair network problems. To enable or disable a wireless or wired network device: 1. Right-click the Network Connection icon in the notification area, at the far right of the taskbar. 2.
As your network grows, additional wireless and wired computers can be connected to the network to access the Internet. For help in setting up your WLAN, see the information provided by your router manufacturer or your ISP. Configuring a wireless router For help in setting up a WLAN, see the information provided by your router manufacturer or your ISP. NOTE: It is recommended that you initially connect your new wireless computer to the router by using the network cable provided with the router.
NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point. NOTE: If you do not see the WLAN you want to connect to, click Open Network and Sharing Center, and then click Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection.
2. Plug the other end of the network cable into a network wall jack (2) or router. NOTE: If the network cable contains noise suppression circuitry (3), which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the computer.
4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like speakers, headphones, monitor, projector, TV, and, on select models, high-definition devices. Multimedia Features Here are some of the entertainment features on your computer. Component Description (1) Internal microphone Records sound.
Component (7) Description Audio-out (headphone) jack Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices.
Connecting a microphone To record audio, connect a microphone to the microphone jack on the computer. For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. Checking the sound To check the audio functions on your computer, follow these steps: 1. Select Computer > Control Center. 2. In the left pane, under Hardware, click Sound. 3.
To connect a monitor or projector: 1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as shown. 2. On select models, press f4 to alternate the screen image between 3 display states: ● View the screen image on the computer. ● View the screen image simultaneously on both the computer and external device. ● View the screen image on the computer extended to the external device. ● View the screen image on the external device (monitor or projector).
3. Select Display Manager from the right pane. 4. Click the Detect connected displays button. 5. Your display settings can be modified by clicking your monitor in the dialog box, and then selecting the Display properties tab or Multi-Display tab. 6. After the settings are configured, click Apply, and then click OK. Your computer may require rebooting.
Configuring audio settings (with HDMI TV) HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, if the HDMI sound does not configure itself automatically, you can turn on HDMI audio by following these steps: 1. Right-click the Speaker icon in the notification area, at the far right of the taskbar, and then click Sound Preferences. 2. On the Output tab, click HD-Audio Generic Digital Stereo (HDMI). 3.
5 Using the keyboard and pointing devices Your computer allows easy on-screen navigation. In addition to the keyboard, a TouchPad allows you to perform on-screen functions. Your computer may also have an integrated numeric keypad. Select models also have special action keys or hot key functions to perform routine tasks simply.
Icon Key Description f3 Increases the screen brightness incrementally as long as you hold down the key. f4 Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Most external monitors receive video information from the computer using the external VGA video standard.
Component Description (1) TouchPad on/off button Turns the TouchPad on or off. (2) TouchPad light ● On: The TouchPad is off. ● Off: The TouchPad is on. (3) TouchPad zone Moves the on-screen pointer and selects or activates items on the screen. (4) Left TouchPad button Functions like the left button on an external mouse. (5) Right TouchPad button Functions like the right button on an external mouse.
Selecting Use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse.
Using TouchPad gestures The TouchPad supports a variety of gestures that let your fingers swipe, pinch, and rotate to manipulate items on the desktop. To use TouchPad gestures, place two fingers on the TouchPad at the same time. NOTE: TouchPad gestures are not supported in all programs. To view information about gestures: 1. Select Computer > Control Center > TouchPad. 2. Click a gesture to view information about it. To turn the gestures off or on: 1.
6 Managing power Your computer can operate on either battery power or external power. When the computer is only running on battery power and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Your computer supports power plans to manage how your computer uses and conserves power so that you can balance computer performance with power conservation.
NOTE: If you have set the computer to require a password on wakeup, you must enter your password before the computer redisplays your work. Initiating and exiting Hibernation The system is set at the factory to initiate Hibernation after a specific period of inactivity, depending on whether the computer is running on battery power or on external power, or when the battery reaches a critical battery level. Power settings and timeouts can be changed in Control Center.
Using power management Power management is a collection of system settings that manages how the computer uses power. Power management can help you conserve power or maximize performance. You can customize power management settings. Viewing the current power management settings ▲ Right-click the Power icon in the notification area, at the far right of the taskbar, and then click Preferences. Changing the current power management settings 1.
3. Pivot the battery (2) upward and (3) remove it from the computer. Finding battery information Help provides the following tools and information about the battery: ● Information about calibration, power management, and proper care and storage to maximize battery life ● Information about battery types, specifications, life cycles, and capacity To access Linux Help, select Computer > Help. Then navigate to the sections on power management.
NOTE: For additional information about the power, see Using the Power icon on page 32. The computer takes the following actions for a critical battery level: ● If Hibernation is enabled and the computer is on or in the Suspend state, the computer initiates Hibernation. ● If Hibernation is disabled, and the computer is on or in the Suspend state, the computer remains briefly in the Suspend state, and then shuts down and loses any unsaved information.
● When running Disk Defragmenter on computers with internal hard drives ● When performing a backup or recovery When you connect the computer to external power: ● The battery begins to charge. ● The display brightness increases. ● The Power icon in the notification area changes appearance. When you disconnect external power, the following events occur: ● The computer switches to battery power. ● The display brightness automatically decreases to save battery life.
7 Managing and sharing information Drives are digital storage devices, including hard drives, solid-state drives, optical drives and more, that help you store, manage, share, and access information. Your computer has an internal hard drive that stores your computer's software, operating system, as well as providing storage for all of your personal files. Some computers also have a built-in optical drive that allows you to read or write to a CD or DVD to play and record audio and video.
▲ Connect the USB cable for the device to the USB port. NOTE: The USB port on your computer may look slightly different from the illustration in this section. A sound indicates that the device has been detected. NOTE: The first time you connect a USB device, a message in the notification area lets you know that the device is recognized by the computer. Removing a USB device CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove the USB device.
Inserting and removing a digital storage card To insert a digital storage card: CAUTION: To reduce the risk of damage to the digital card connectors, use minimal force to insert a digital card. 1. Hold the card label-side up, with the connectors facing the computer. 2. Insert the card into the digital storage slot, and then press in on the card until it is firmly seated. A sound indicates that the device has been detected, and a menu of options displays.
Using optical drives An optical disc drive uses laser light to read or store large amounts of information. Some drives can only read information, but others can also write (burn) information onto a blank disc. Use these tips for best performance of your optical drive: ● When the battery is the only source of power, be sure the battery is sufficiently charged before writing to media. ● Do not type on the keyboard or move the computer while an optical drive is writing to a disc.
5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 6. Close the disc tray. NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an AutoPlay dialog box opens. It prompts you to select how you want to use the media content. Removing an optical disc 1.
If the disc tray does not open normally, see Disc drive problems on page 64.
8 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter provides information about improving the performance of your computer by running system tools and by replacing a hard drive or adding memory. It also provides information about updating your programs and drivers, instructions for cleaning your computer, and tips for travelling with your computer.
CAUTION: To prevent information loss or an unresponsive system: Before removing or installing a drive, shut down the computer. If you are unsure whether the computer is off, in the Sleep state, or in Hibernation, turn the computer on, and then shut it down through the operating system. 1. Save your work and shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Unplug the power cord from the AC outlet. 4. Turn the computer upside down on a flat surface. 5.
2. Loosen the hard drive cover screw (1) and then lift up the cover (2) and remove it (3). 3. Remove the 4 screws that hold the drive in place (1). 4. Remove the hard drive bracket (2), which hold the hard drive in place, to access the hard drive itself. Disconnect the hard drive cable (3) from the computer. Lift the hard drive out of the hard drive bay.
5. Disconnect the hard drive cable (1) from the hard drive. Remove the brackets from the hard drive (2). Disconnect the hard drive cable (3) from the hard drive. To install a hard drive, reverse this procedure. Adding or replacing memory modules Adding memory can help improve your computer's performance. Your computer is like your physical work area. The hard drive is the filing cabinet where you store your work and the memory is the desk where you work.
5. Remove the battery from the computer. 6. Remove the service door from the computer. 7. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. b. Grasp the edge of the memory module (2), and then gently pull the module out of the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
9. Replace the memory module service door. 10. Replace the battery. 11. Turn the computer right-side up, and then reconnect external power and external devices. 12. Turn on the computer. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis to the latest versions. Updates can resolve issues and bring new features and options to your computer.
Cleaning the display, sides, and cover Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Allow the display to dry before closing the computer cover. Use a pre-moistened germicidal wipe to clean the sides and cover. Fibrous materials, such as paper towels, can scratch the computer. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris.
● If the computer will be unused and disconnected from external power for more than 2 weeks, remove the battery and store it separately. ● If you are shipping the computer or a drive, use suitable protective packaging and label the package “FRAGILE.” ● If the computer has a wireless device installed, the use of these devices may be restricted in some environments. Such restrictions may apply onboard aircraft, in hospitals, near explosives, and in hazardous locations.
9 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the operating system, HP applications, the Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. IMPORTANT: Some security features listed in this chapter may not be available on your computer.
Use the following tips for creating and saving passwords: ● To reduce the risk of being locked out of the computer, record each password and store it in a secure place away from the computer. Do not store passwords in a file on the computer. ● When creating passwords, follow requirements set by the program. ● Change your passwords at least every three months. ● An ideal password is long and has letters, punctuation, symbols, and numbers.
To set, change, or delete an administrator or power-on password in Setup Utility (BIOS): 1. Open Setup Utility (BIOS) by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. 2. Use the arrow keys and follow the on-screen instructions. When the Startup Menu is displayed, press f10. 3. Use the arrow keys to select Security, and then follow the on-screen instructions.
Installing HP and third-party software updates HP recommends that you regularly update the software and drivers that were originally installed on your computer. To download the latest versions, go to http://www.hp.com/support. At this location, you can also register to receive automatic update notifications when they become available. If you have installed third-party software after you purchased your computer, regularly update the software.
3. Insert the security cable lock into the security cable slot on the computer (3), and then lock the security cable lock with the key. 4. Remove the key and keep it in a safe place.
10 Setup Utility (BIOS) and Advanced System Diagnostics Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility includes settings for the types of peripherals installed, the startup sequence of the computer, and the amount of system and extended memory. NOTE: Use extreme care when making changes in Setup Utility.
Displaying system information 1. Start Setup Utility. 2. Select the Main menu. System information such as the system time and date, and identification information about the computer is displayed. 3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. Restoring factory default settings in Setup Utility 1. Start Setup Utility. 2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter. 3.
BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing fn+esc or by using Setup Utility. 1. Start Setup Utility. 2. If the system information is not displayed, use the arrow keys to select the Main menu. BIOS and other system information is displayed. 3. To exit Setup Utility, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter.
Using Advanced System Diagnostics Advanced System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The following diagnostic tests are available in Advanced System Diagnostics: ● Start-up test—This test analyzes the main computer components that are required to start the computer. ● Run-in test—This test repeats the start-up test and checks for intermittent problems that the start-up test does not detect.
11 Backup and Recovery The following sections are included in this chapter: ● Performing a system recovery ● Backing up your information Recovery after a system failure is as good as your most recent backup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. Performing a system recovery Recovery allows you to repair or restore the computer to its original factory state.
To create the restore image: 1. Select Computer > More Applications. 2. Click Tools, and then click Create Restore USB. 3. Follow the on-screen instructions. Performing recovery using the restore DVD 1. If possible, back up all personal files. 2. Shut down the computer. 3. Be sure the restore DVD or USB device is connected to the computer. 4. Restart the computer. 5. Using the arrow keys, select Recovery, and then press enter. 6. Follow the on-screen instructions.
4. To restore all files from the selected location, click Restore all files. To restore selected files only, click Restore selected files, click Select Files, and then select the files to be restored. 5. Under Restore Point, click the time and date of the backup. NOTE: If multiple backups have been performed, click Use the latest version to restore the latest version. 6. 62 Click Restore to start restoring the files, or click Cancel to cancel the operation.
12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
13 Troubleshooting and support ● Troubleshooting ● Contacting customer support Troubleshooting Disc drive problems If the disc tray fails to open normally, follow these steps: 1. Insert the end of a paper clip into the release access (1) in the front bezel of the drive. 2. Press in gently on the paper clip until the tray is released, and then pull out the tray (2) until it stops. 3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc.
● Wireless device encountered interference from other devices. ● Wireless device or router hardware has failed. NOTE: Wireless networking devices are included with select computer models only. If wireless networking is not listed in the feature list on the side of the original computer package, you may add wireless networking capability to the computer by purchasing a wireless networking device.
on a secure network. The SSID and security code are alphanumeric codes that you enter into your computer to identify your computer to the network. ● For a network connected to your personal wireless router, review the router user guide for instructions on setting up the same codes on both the router and the WLAN device.
Network status icon is not displayed If the network status icon is not displayed in the notification area after you configure the WLAN, the software driver is either missing or corrupted. A “Device not Found” error message may also be displayed. The driver must be reinstalled. Get the latest version of the WLAN device software and drivers for your computer from the HP website at http://www.hp.com.
Resolving a low battery level Resolving a low battery level when external power is available ● Connect an AC adapter. ● Connect an optional docking or expansion device. ● Connect an optional power adapter purchased as an accessory from HP. Resolving a low battery level when no power source is available ● Initiate Hibernation. ● Save your work and shut down the computer.
NOTE: For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can: ● Chat online with an HP technician. NOTE: When support chat is not available in a particular language, it is available in English. ● Email support. ● Find support telephone numbers. ● Locate an HP service center.
14 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
Index A AC adapter 4 action keys decrease screen brightness 26 Help and Support 26 identifying 11 increase screen brightness 27 next track or section 27 play, pause, resume 27 previous track or section 27 switch screen image 27 volume down 27 volume mute 27 volume up 27 wireless 27 airport security devices 43 antivirus software, using 53 audio functions, checking 22 audio-in (microphone) jack 5 audio-out (headphone) jacks 5 B backing up software and information 54 backup 60 battery conserving power 34 dispo
optional external devices, using 38 operating system applications 11 operating system logo 11 L labels Bluetooth 14 regulatory 14 serial number 13 service 13 wireless certification 14 WLAN 14 latch, battery release 12 lights AC adapter 4 caps lock 9 hard drive 6 optical drive 3 power 9 TouchPad 28 webcam 7, 20 wireless 9 M memory module inserting 47 removing 47 replacing 46 memory module compartment, identifying 13 mouse, external setting preferences 26 N network jack, identifying 5 O operating environ
USB devices connecting 37 description 37 removing 38 USB hubs 37 USB ports, identifying 3, 5, 20 using external AC power 35 using passwords 51 using the power icon 32 V vents, identifying 5, 12 VGA port, connecting 22 video 22 W webcam 21 webcam light, identifying 7, 20 webcam, identifying 7, 20 Wireless Assistant software 15 wireless button 15 wireless certification label 14 wireless controls button 15 operating system 15 Wireless Assistant software 15 wireless light 9, 15 wireless module compartment, iden