Manual

Creating and assigning drive-bay zone groups
IMPORTANT: The maximum supported number of drive bay zone groups is 104.
To create drive-bay zone groups, expand the display for the active switch in the navigation tree,
select a specific Blade Port, and then click the Create and Assign Zone Group task button. .
Select the following parameters:
Name Type a name to assign to the zone group (must be unique, up to 16 characters,
with no spaces). HP recommends that the zone group name include the bay
number or name of the server that needs access the zone group. An effective
naming strategy will help manage the assignment of drive-bay zone groups to
servers.
Zoning Mode Select Drive Bay.
Drive bays In the grid representing the storage enclosures, select the disk drive bays to be
included in the zone group.
To select a drive bay, click an available (white) drive bay. (The bay status is
automatically updated, changing the color from white to blue.) To clear a
selection, click the selected (blue) drive bay. (The bay status is automatically
updated, changing the color from blue to white).
• White=Selectable—Not yet assigned to a zone group and can be added
to this zone group.
Create and Assign Zone Group task 33