Hardware Reference Guide

11. Replace the computer access panel.
12. If the computer was on a stand, replace the stand.
13. Reconnect the power cord and any external devices, and then turn on the computer.
14. Lock any security devices that were disengaged when the access panel was removed.
Removing and installing an M.2 SSD storage card
NOTE: There are two M.2 SSD sockets on the system board. The computer supports 2230 and 2280 M.2 SSD
cards.
1. Prepare the computer for disassembly. See Preparing for disassembly on page 4.
2. If the computer is on a stand, remove the computer from the stand.
3. Remove the computer access panel. See Removing the computer access panel on page 5.
4. Remove the front bezel.
5. Rotate the drive cage to its upright position.
Removing and installing drives 37