Hardware Reference Guide
Changing from desktop to tower conguration
You can use the small form factor computer in a tower orientation with an optional tower stand that can be
purchased from HP.
NOTE: To stabilize the computer in a tower orientation, HP recommends the use of the optional tower
stand.
1. Remove or disengage any security devices that prohibit moving the computer.
2. Remove all removable media, such as compact discs or USB ash drives, from the computer.
3. Turn o the computer properly through the operating system, and turn o any external devices.
4. Disconnect the power cord from the AC outlet and disconnect any external devices.
IMPORTANT: Regardless of the power state, voltage is always present on the system board as long as
the system is plugged into an active AC outlet. To prevent damage to internal components, you must
disconnect the power cord from the power source before opening the computer.
5. Orient the computer so that its right side is facing up, and place the computer in the optional stand.
6. Reconnect the power cord and any external devices, and then turn on the computer.
NOTE: Be sure that at least 10.2 cm (4 inches) of space on all sides of the computer remains clear and
free of obstructions.
7. Lock any security devices that you disengaged before you moved the computer.
Changing from desktop to tower conguration 11