Hardware Reference Guide

8. Press the release lever on the side of the drive cage (1), and lift that side of the drive cage up (2). Then
slide the drive cage (3) out of the chassis.
9. Open both latches of the memory module socket (1), and insert the memory module into the socket (2).
Press the module down into the socket, making sure that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory socket.
Populate the black DIMM sockets before the white DIMM sockets.
For maximum performance, populate the sockets so that the memory capacity is spread as equally as
possible between Channel A and Channel B.
10. Repeat step 9 to install any additional modules.
Upgrading system memory 15