Maintenance and Service Guide

5 Removal and replacement
procedures
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to
http://partsurfer.hp.com, select your country or region, and
then follow the on-screen instructions.
Tablet component replacement procedures
CAUTION: Tablet components described in this chapter should only be accessed by an authorized
service provider. Accessing these parts can damage the tablet and void the warranty.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 6 screws that must be removed, replaced, and/or loosened when servicing the
tablet. Make special note of each screw size and location during removal and replacement.
Back cover
Description Spare part number
For use only on HP 7 Plus Tablet models 762205-001
For use only on HP 7.1 Tablet models 762207-001
7-in., LCD, TouchScreen IPS display panel assembly for use only on HP 7 Plus Tablet models 775002-001
7-in., LCD, TouchScreen TN display panel assembly for use only on HP 7.1 Tablet models 775010-001
Before disassembling the tablet, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
14 Chapter 5 Removal and replacement procedures