Product Data Sheet / Brochure

ManualsBrandsHP ManualsComputer HardwareA3610-24 24-Ports RJ45 4x SFP Ports (Free) 1x Console Port Rack-Mountable Switch JD336A#ABA

Models

ModelsModels

Models

HP 3610-48 Switch

JD335A

HP 3610-24 Switch

JD336A

HP 3610-24-TP Switch

JD337A

HP 3610-24-SFP Switch

JD338A

Key features

Key featuresKey features

Key features

Full enterprise-class management features

Lower network administration costs

Unified network security strategy

Easy migration from IPv4 to IPv6

Product overview

Product overviewProduct overview

Product overview

These are fully managed 24- or 48-port 10/100 Layer 3 wire-speed Fast Ethernet switches with 4 Gigabit Ethernet uplinks and full

management features. The series has Layer 2/Layer 3 switching with advanced Layer 3 routing using static routes, RIP, OSPF BGP,

and multicast (PIM) routing. Fully IPv6 capable, with advanced IPv6/IPv4 routing, this series delivers a smooth transition from IPv4 to

IPv6.

Features and benefits

Features and benefitsFeatures and benefits

Features and benefits

Quality of Service

Quality of ServiceQuality of Service

Quality of Service

(QoS)

Broadcast control

Broadcast controlBroadcast control

Broadcast control

: allows limitation of broadcast traffic rate to cut down on unwanted broadcast traffic on the network

Powerful QoS feature

Powerful QoS featurePowerful QoS feature

Powerful QoS feature

: supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR),

SP+WRR, and WRED

Traffic policing

Traffic policingTraffic policing

Traffic policing

: supports Committed Access Rate (CAR) and line rate

Advanced classifier-based QoS

Advanced classifier-based QoSAdvanced classifier-based QoS

Advanced classifier-based QoS

: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies

QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch

Management

ManagementManagement

Management

Friendly port names

Friendly port namesFriendly port names

Friendly port names

: allow assignment of descriptive names to ports

Remote configuration and management

Remote configuration and managementRemote configuration and management

Remote configuration and management

: is available through a secure Web browser or a command-line interface (CLI)

Manager and operator privilege levels

Manager and operator privilege levelsManager and operator privilege levels

Manager and operator privilege levels

: enable read-only (operator) and read-write (manager) access on CLI and Web

browser management interfaces

Command authorization

Command authorizationCommand authorization

Command authorization

: leverages RADIUS to link a custom list of CLI commands to an individual network administrator's

Secure Web GUI

Secure Web GUISecure Web GUI

Secure Web GUI

: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS

Multiple configuration files

Multiple configuration filesMultiple configuration files

Multiple configuration files

: can be stored to the flash image

Complete session logging

Complete session loggingComplete session logging

Complete session logging

: provides detailed information for problem identification and resolution

SNMPv1, v2c, and v3

SNMPv1, v2c, and v3SNMPv1, v2c, and v3

SNMPv1, v2c, and v3

: facilitate centralized discovery, monitoring, and secure management of networking devices

Remote monitoring

Remote monitoringRemote monitoring

Remote monitoring

(RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, and

statistics group plus a private alarm extension group

IEEE 802.1AB Link Layer Discovery Protocol

IEEE 802.1AB Link Layer Discovery ProtocolIEEE 802.1AB Link Layer Discovery Protocol

IEEE 802.1AB Link Layer Discovery Protocol

(LLDP): automated device discovery protocol provides easy mapping by network

management applications

sFlow

sFlowsFlow

sFlow

(RFC 3176): provides scalable, ASIC-based wire-speed network monitoring and accounting with no impact on network

QuickSpecs

HP 3610 Switch Series

HP 3610 Switch SeriesHP 3610 Switch Series

HP 3610 Switch Series

Overview

DA - 13793 Worldwide — Version 4 — November 7, 2011

Page 1

Summary of content (28 pages)

PAGE 1
QuickSpecs HP 3610 Switch Series Overview Models HP 3610-48 Switch HP 3610-24 Switch HP 3610-24-TP Switch HP 3610-24-SFP Switch JD335A JD336A JD337A JD338A Key features Full enterprise-class management features Lower network administration costs Unified network security strategy Easy migration from IPv4 to IPv6 Product overview These are fully managed 24- or 48-port 10/100 Layer 3 wire-speed Fast Ethernet switches with 4 Gigabit Ethernet uplinks and full management features.
PAGE 2
QuickSpecs HP 3610 Switch Series Overview performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes Management VLAN: VLAN segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP Device Link Detection Protocol (DLDP): monitors cable between two switches and shuts down the ports on both ends if the cable is broken, preventing network pro
PAGE 3
QuickSpecs HP 3610 Switch Series Overview Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet Dynamic Host Configuration Protocol (DHCP): simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets Loopback interface address: address defines an address in Routing Information Protocol (RIP) and OSPF that can always be reachable, improving diagnostic capability User Datagram Protocol (UDP) hel
PAGE 4
QuickSpecs HP 3610 Switch Series Overview LLDP-MED: LLDP-MED is a standard extension that automatically configures network devices, including LLDP-capable IP phones LLDP-CDP compatibility: receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation Voice VLAN: VLAN automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance IP multicast snooping (data-driven IGMP): automatically prevents flooding of IP multicast traffic Internet Group
PAGE 5
QuickSpecs HP 3610 Switch Series Technical Specifications HP 3610-48 Switch (JD335A) 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Ports Duplex: half or full 4 SFP 1000 Mbps ports 1 RJ-45 serial console port 10.2(d) x 17.3(w) x 1.7(h) in. (25.91 x 43.94 x 4.32 cm) (1U height) Physical characteristics Dimensions 8.38 lb. (3.8 kg) Weight 128 MB SDRAM, 32 MB flash; packet buffer size: 32 MB Memory and processor Mounts in an EIA standard 19-in.
PAGE 6
QuickSpecs HP 3610 Switch Series Technical Specifications 4-year, 4-hour onsite, 24x7 coverage for hardware (UV826E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV829E) 4-year, 24x7 SW phone support, software updates (UV832E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV824E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UV827E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV830E) 5-year, 24x7 SW phone support, software updates (UV833E) 3
PAGE 7
QuickSpecs HP 3610 Switch Series Technical Specifications Safety Emissions Management Services UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.
PAGE 8
QuickSpecs HP 3610 Switch Series Technical Specifications Electrical characteristics Operating relative 10% to 90%, noncondensing humidity -40ºF to 158ºF (-40ºC to 70ºC) Nonoperating/Storage temperature 5% to 95%, noncondensing Nonoperating/Storage relative humidity Maximum heat dissipation 137 BTU/hr (144.
PAGE 9
QuickSpecs HP 3610 Switch Series Technical Specifications Ports Physical characteristics Memory and processor Mounting Performance Environment Electrical characteristics Safety Emissions Management Services 24 SFP 100 Mbps ports 2 SFP 1000 Mbps ports 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 serial console port 10.2(d) x 17.3(w) x 1.7(h) in.
PAGE 10
QuickSpecs HP 3610 Switch Series Technical Specifications 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV829E) 4-year, 24x7 SW phone support, software updates (UV832E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV824E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UV827E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV830E) 5-year, 24x7 SW phone support, software updates (UV833E) 3 Yr 6 hr Call-to-Repair Onsite (UW431E) 4 Yr 6 hr Call-to-R
PAGE 11
QuickSpecs HP 3610 Switch Series Technical Specifications IEEE 802.3u 100BASE-X IEEE 802.3x Flow Control IEEE 802.
PAGE 12
QuickSpecs HP 3610 Switch Series Accessories HP 3610 Switch Series accessories Transceivers HP X124 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X125 1G SFP RJ45 T Transceiver HP X110 100M SFP LC LH40 Transceiver HP X110 100M SFP LC LH80 Transceiver HP X110 100M SFP LC FX Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X110 100M SFP LC LX Transceiver Cables HP 0.
PAGE 13
QuickSpecs HP 3610 Switch Series Accessory Product Details NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. HP X124 1G SFP LC LH40 Ports 1310nm Transceiver Connectivity (JD061A) A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a single-mode fiber.
PAGE 14
QuickSpecs HP 3610 Switch Series Accessory Product Details HP X125 1G SFP LC LH70 Transceiver (JD063B) Ports Connectivity A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber. Physical characteristics Electrical characteristics Cabling Maximum distance: • 70km Fiber type Single Mode Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers.
PAGE 15
QuickSpecs HP 3610 Switch Series Accessory Product Details HP X120 1G SFP LC SX Transceiver (JD118B) Ports Connectivity A small form-factor pluggable (SFP) Gigabit SX Physical characteristics transceiver that provides a full-duplex Gigabit solution up to 550m on a Electrical characteristics Multimode fiber.
PAGE 16
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 0.
PAGE 17
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 1 m Multimode OM3 Cabling LC/LC Optical Cable (AJ834A) Cable type: type 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m Maximum distance: distance 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end
PAGE 18
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 2 m Multimode OM3 Cabling LC/LC Optical Cable (AJ835A) Cable type: type 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: distance 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end
PAGE 19
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 5 m Multimode OM3 Cabling LC/LC Optical Cable (AJ836A) Cable type: type 50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: distance 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable an
PAGE 20
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A) Cabling Cable type: type 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: distance 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one e
PAGE 21
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A) Cabling Cable type: type 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: distance 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one e
PAGE 22
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A) Cabling Cable type: type 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: distance 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one e
PAGE 23
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable (BK837A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
PAGE 24
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 2 m PremierFlex OM3+ LC/LC Optical Cable (BK839A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
PAGE 25
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 15 m PremierFlex OM3+ LC/LC Optical Cable (BK841A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
PAGE 26
QuickSpecs HP 3610 Switch Series Accessory Product Details HP 50 m PremierFlex OM3+ LC/LC Optical Cable (BK843A) Notes Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end.
PAGE 27
QuickSpecs HP 3610 Switch Series Accessory Product Details Notes Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PAGE 28
QuickSpecs HP 3610 Switch Series Accessory Product Details To learn more, visit: www.hp.com/networking © Copyright 2010-2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.