User Manual

Figure : Pressing down on the unseated ink cartridge
7. If the ink cartridge does not snap into place, remove the ink cartridge from the carriage.
1. Gently bend the tab away from the ink cartridge.
caution:
Be careful not to bend the tab out more than 1.27 cm (0.5 in). Moving the
tab too far might damage the ink cartridge or cause the tab to break off.
Figure : Gently bending the tab away from the ink cartridge
1. Bend the tab away from the ink cartridge
2. Do not bend the tab more than 1.27 cm (0.5 in)
2. Reinsert the ink cartridge into the carriage until it snaps into place.
8. Close the ink cartridge access door.
Try to print. If the issue persists, continue to the next step.
Step 2: Clean the ink cartridge and printhead contacts
Remove the ink cartridges to clean the ink cartridge and printhead contacts, and then reinstall the
ink cartridges into the printer.
caution: