Maintenance and Service Guide

Fan
Table 6-11 Fan description and part number
Description Spare part number
Fan L60624-001
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 32).
2. Remove the bottom cover (see Bottom cover on page 32).
3. Remove the battery (see Battery on page 45).
4. Remove the keyboard (see Keyboard on page 41).
Remove the fan:
NOTE: To remove the fan you must remove screws from both the top (under the keyboard) and bottom of
the computer.
1. Position the computer upright and open as far as possible.
2. Remove the two Phillips M2.0 × 3.0 screws that secure the fan to the computer.
3. Close the computer and position it upside down.
4. Disconnect the fan cable from the system board (1).
5. Loosen the three captive Phillips screws (2) that secure the fan to the computer.
Component replacement procedures 57