User's Manual

c. Select Advanced Setup, and then select Fax Resolution.
d. Select the desired resolution setting, and then press OK.
Fax quality is poor
Fax is blurry or light.
● Increase fax resolution when sending faxes. Resolution does not aect received faxes.
a. On the printer control panel, press the Setup button .
b. Select Fax Setup.
c. Select Advanced Setup, and then select Fax Resolution.
d. Select the desired resolution setting, and then press OK.
NOTE: Increasing resolution slows transmission speed.
● Turn on the Error Correction setting from the control panel.
a. On the printer control panel, press the Setup button .
b. Select Service, and then select Fax Service.
c. Select Error Correction, and then select On.
● Check the toner cartridges and replace if necessary.
● Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.
Fax cuts o or prints on two pages
● Set the Default Paper Size setting. Faxes print on a single size of paper based on the Default Paper Size
settings.
a. On the printer control panel, press the Setup button .
b. Select System Setup, and then select Paper Setup.
c. Select Default Paper Size, and then select the correct setting.
● Set the paper type and size for the tray used for faxes.
● Turn on the Fit to Page setting to print longer length faxes on letter or A4 size paper.
a. On the printer control panel, press the Setup button .
b. Select Fax Setup, and then select Advanced Setup.
c. Select Fit to Page, and then select On.
NOTE: If the Fit to Page setting is o and the Default Paper Size setting is set to letter, a legal size original prints
on two pages.
ENWW Solve fax problems 149