User's Manual

Make a copy
NOTE: The steps vary according to the type of control panel.
1 2
Table 5-1 Control panels
Number Description
1 LED control panel
2 2-line control panel
LED control panels:
1. Load the document on the scanner glass according to the indicators on the printer.
2. Press the Copy Menu button to choose any of the following copy settings.
● Select the Number of Copies setting, and then use the arrow keys to adjust the number of copies.
● Select the Lighter/Darker setting, and then use the arrow keys to adjust the darkness setting for the
current copy job.
● Select the Enlarge/Reduce setting, and then use the arrow keys to adjust the size percentage of the
copy job.
3. Press the Start Mono Copy button or the Start Color Copy / Resume button to start copying.
2-line control panels:
1. Load the document on the scanner glass according to the indicators on the printer.
2. Press the Copy Menu button .
3. To optimize copy quality for dierent types of documents, use the arrow keys to select the Optimize menu,
and then press the OK button. The following copy-quality settings are available:
● Auto Select: Use this setting when you are not concerned about the quality of the copy. This is the
default setting.
● Mixed: Use this setting for documents that contain a mixture of text and graphics.
● Text: Use this setting for documents that contain mostly text.
● Picture: Use this setting for documents that contain mostly graphics.
46 Chapter 5 Copy ENWW