HP LaserJet Enterprise MFP M634, M635, M636 - User Guide
NOTE: Completing the other elds on this page is optional.
5. Click the Apply button to save the changes.
Manually congure IPv4 TCP/IP parameters from the control panel
Use the control-panel Settings menus to manually set an IPv4 address, subnet mask, and default gateway.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
a. Networking
b. Ethernet
c. TCP/IP
d. IPV 4 Settings
e. Cong Method
3. Select the Manual option, and then select OK.
4. Open the Manual Settings menu.
5. Select the IP Address, Subnet Mask, or Default Gateway option.
6. Use the numeric keypad to enter the correct digits for the eld, and then select OK.
Repeat the process for each eld to be congured.
Manually congure IPv6 TCP/IP parameters from the control panel
Use the control-panel Settings menus to manually set an IPv6 address.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. To enable manual conguration, open the following menus:
a. Networking
b. Ethernet
c. TCP/IP
d. IPV6 Settings
3. Select Enable, select On, and then select OK.
4. Open the Address menu.
5. Open the Manual Settings menu, and then select Address. Use the keypad to enter the address, and then
select OK.
156 Chapter 8 Manage the printer ENWW