HP LaserJet Enterprise MFP M634, M635, M636 - User Guide

● Select the 600 dpi option, if available.
● Select the EconoMode check box to enable it.
If the entire page is too light, use these settings:
● Select the FastRes 1200 option, if available.
● Clear the EconoMode check box to disable it.
5. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to
print the job.
Adjust print density
Complete the following steps to adjust the print density.
1. From the Home screen on the printer control panel, select the Settings menu.
2. Open the following menus:
● Copy/Print or Print
● Print Quality
● Toner Density
3. Move the slider toward either Less or More to the desired density setting.
Troubleshoot image defects
Table
9-2 Image defects table quick reference
Table 9-9 Light print on page 213 Table 9-7 Gray background or dark print
on page 212
Table 9-5 Blank page — No print on page 211
208 Chapter 9 Solve problems ENWW