HP LaserJet Enterprise MFP M634, M635, M636 - User Guide
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
a. Manage Stapler/Stacker
b. Operation Mode
3. Select a mode from the list of options, and then select the Save button. The following options are available:
● Mailbox: The printer places jobs in dierent bins according to the person who sent them.
● Stacker: The printer stacks jobs in the bins from bottom to top.
● Function Separator: The printer places jobs in dierent bins according to printer function such as print
jobs, copy jobs, or fax jobs.
To congure the HP print driver for the selected operation mode, complete the following steps:
Windows
®
8.0, 8.1, and 10
1. Right-click on the bottom-left corner of the screen.
2. Select Control Panel. Under Hardware and Sound, select View devices and printers.
3. Right-click the name of the printer, and then select Printer Properties.
4. Click the Device Settings tab.
5. Select Update Now. Or, in the drop-down menu next to Automatic Conguration, select Update Now.
NOTE: Newer V4 drivers do not support Update Now. For these drivers, complete one of the following
procedures:
● Manually congure the operation mode under Accessory Output Bin, if listed.
● Stop and restart the print spooler
a. Click the Start button (or open a search box).
b. Type services.msc, and then press the Enter key.
c. Right-click Print Spooler in the list of services, and select Stop.
d. Right click Print Spooler again, and select Start.
● Shut down and restart the computer.
Windows
®
7
1. Make sure the printer is turned on and connected to the computer or a network.
2. Open the Windows
®
Start menu, and then click Devices and Printers.
3. Right-click the name of the printer, and then select Printer Properties.
4. Click the Device Settings tab.
5. Select Update Now. Or, in the drop-down menu next to Automatic Conguration, select Update Now.
ENWW Congure the 900-sheet 3-bin Stapling Mailbox 45