HP LaserJet Enterprise MFP M634, M635, M636 - Warranty and Legal Guide
Table Of Contents
- Servis a podpora
- Vyhlásenie o obmedzenej záruke spoločnosti HP
- Záruka s prémiovou ochranou od spoločnosti HP: Vyhlásenie o obmedzenej záruke na kazety s tonerom La ...
- Vyhlásenie o obmedzenej záruke na spotrebný materiál s dlhou životnosťou a súpravu na údržbu
- Politika spoločnosti HP týkajúca sa spotrebného materiálu od iných výrobcov
- Webová lokalita HP zameraná na boj proti falzifikátom
- Údaje uložené na kazete s tonerom
- Licenčná zmluva koncového používateľa
- Záručná služba opravy zo strany zákazníka
- Podpora zákazníkov
- Program ekologického dohľadu nad výrobkami
- Ochrana životného prostredia
- Produkcia ozónu
- Spotreba energie
- Spotreba tonera
- Použitie papiera
- Plasty
- Spotrebný materiál tlačiarne HP LaserJet
- Papier
- Obmedzenia materiálov
- Informácie o batérii
- Likvidácia odpadových zariadení používateľmi (EÚ a India)
- Recyklácia elektronických zariadení
- Informácie o recyklácii zariadení v Brazílii
- Chemické látky
- Údaje o napájaní produktu podľa nariadenia komisie Európskej únie 1275/2008
- Informácie pre používateľov na ekologickom štítku SEPA (Čína)
- Predpis týkajúci sa zavádzania čínskeho energetického štítka na tlačiareň, fax a kopírku
- Obmedzenie vo vyhlásení o nebezpečných látkach (India)
- WEEE (Turecko)
- Tabuľka substancií (Čína)
- Hárok s údajmi o bezpečnosti materiálu (MSDS)
- EPEAT
- Tabuľka substancií (Taiwan)
- Ďalšie informácie
- Informácie o predpisoch
- Vyhlásenia o normách
- Identifikačné čísla homologizácie modelu
- Regulačné vyhlásenie pre štáty Európskej únie
- Nariadenia FCC
- Kanada – vyhlásenie organizácie Industry Canada o súlade s normou ICES-003
- Vyhlásenie VCCI (Japonsko)
- Vyhlásenie EMC (Kórea)
- Vyhlásenie EMC (Čína)
- Pokyny pre napájací kábel
- Vyhlásenie o napájacom kábli (Japonsko)
- Bezpečnosť laserového zariadenia
- Vyhlásenie laserového zariadenia pre Fínsko
- Vyhlásenia pre Škandináviu (Dánsko, Fínsko, Nórsko, Švédsko)
- Vyhlásenie o kontrole bezpečnosti (Nemecko)
- Označenie zhody pre eurázijské krajiny (Arménsko, Bielorusko, Kazachstan, Kirgizsko, Rusko)
- Vyhlásenie EMI (Taiwan)
- Stabilita produktu
- Vyhlásenie o telekomunikáciách (fax)
- Vyhlásenie týkajúce sa kábla faxu
- Vyhlásenie pre EÚ o telekomunikačnej prevádzke
- Vyhlásenie o telekomunikáciách pre Nový Zéland
- Doplnkové vyhlásenie FCC pre telekomunikačné produkty (USA)
- Zákon o ochrane spotrebiteľov telefónov (USA)
- Požiadavky CS-03 Industry Canada
- Označenie telekomunikačných zariadení pre Japonsko
- Bielorusko
- Vyhlásenia o bezdrôtovej sieti
- Regulačná poznámka pre Európu
- Vyhlásenie FCC o zhode – Spojené štáty
- Vyhlásenie pre Austráliu
- Brazílske vyhlásenie ANATEL
- Vyhlásenia pre Kanadu
- Produkty s 5 GHz prevádzkou podľa normy ministerstva priemyslu Kanady (Industry Canada)
- Vystavenie rádiofrekvenčnej radiácii (Kanada)
- Regulačné vyhlásenie pre štáty Európskej únie
- Čínske vyhlásenie o bezdrôtových zariadeniach (CMIIT)
- Upozornenie týkajúce sa používania v Japonsku
- Upozornenie týkajúce sa používania v Rusku
- Vyhlásenie pre Mexiko
- Vyhlásenie pre Taiwan
- Vyhlásenie NCC pre Taiwan
- Vyhlásenie pre Kóreu
- Vyhlásenie o bezdrôtových zariadeniach pre Thajsko
- Označenie schválených bezdrôtových telekomunikačných zariadení typu ICTQC pre Vietnam
- Vyhlásenia o normách
- Register
Doplnkové vyhlásenie FCC pre telekomunikačné produkty (USA)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back
of this equipment is a label that contains, among other information, a product identier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The REN is used to determine the quantity of devices, which may be connected to the telephone line. Excessive
RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not
all, areas, the sum of the RENs should not exceed ve (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone company to determine the
maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed
to be connected to the telephone network or premises wiring using a compatible modular jack, which is Part 68
compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party
Line Service is subject to state taris.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to le a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
aect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please see the numbers in this manual for repair and (or) warranty
information. If the trouble is causing harm to the telephone network, the telephone company may request you
remove the equipment from the network until the problem is resolved.
The customer can do the following repairs: Replace any original equipment that came with the device. This
includes the toner cartridge, the supports for trays and bins, the power cord, and the telephone cord. It is
recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected.
This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.
Zákon o ochrane spotrebiteľov telefónov (USA)
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any message unless such message clearly contains, in a
margin at the top or bottom of each transmitted page or on the rst page of the transmission, the date and time
it is sent and an identication of the business, other entity, or individual sending the message and the telephone
number of the sending machine or such business, or other entity, or individual. (The telephone number provided
cannot be a 900 number or any other number for which charges exceed local or long distance transmission
charges).
Požiadavky CS-03 Industry Canada
Notice: The Industry Canada label identies certied equipment. This certication means the equipment meets
certain telecommunications network protective, operational, and safety requirements as prescribed in the
appropriate Terminal Equipment Technical Requirement document(s). The Department does not guarantee the
equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is
permissible for the equipment to be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. The customer should be aware that
compliance with the above conditions may not prevent degradation of service in some situations. Repairs to
SKWW Vyhlásenie o telekomunikáciách (fax) 39










