Owner manual

10
Opening QuickTools
Once the switch is operational, open the QuickTools web applet.
To open the QuickTools web applet:
1. In an Internet browser, enter the switch IP address (the default is 10.0.0.1). (If your workstation does not
have the Java 2 Run Time Environment program, you are prompted to download it.)
2. The Add a New Fabric dialog box (Figure 1) prompts you for your user name (the default is admin)
and password (the default is password).
Figure 1 Add a New Fabric dialog box
3. Click Add Fabric to open the fabric. (If you do not have a secure Ethernet connection, the Non Secure
Connection Check dialog box prompts you to establish a non-secure connection.)
4. The opening window is displayed (Figure 3). For security reasons, you are prompted to change your
user account password that was initially set up by the administrator (Figure 2).
Figure 2 Password Change Required dialog box
NOTE: Until you change the default password, you are prompted to change the password each time you
attempt to open the fabric.
5. Click OK, and change the user account password. See ”Managing user accounts” (page 51) for more
information.