Owner manual

HP 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 49
Test Fault Code The code value for the last recorded diagnostic test status recorded
on the switch.
Network Group
IPv4 Enabled Internet Protocol version 4 Enabled or Disabled
IPv4 Address Internet Protocol version 4 address
IPv4 Subnet Mask Mask that determines the IP address subnet
IPv4 Gateway Gateway address
IPv6 Enabled Internet Protocol version 6 Enabled or Disabled
IPv6 Address Mask that determines the IP address subnet
IPv6 Gateway Gateway address
SNMP Enabled SNMP Enabled or Disabled
SNMP v3 Security Enabled SNMP v3 Security Enabled or Disabled
Broadcast Support Broadcast support status. Broadcast support is enabled (default) or
disabled.
NTP Client Enabled NTP Client Enabled or Disabled. If Enabled, this parameter allows
switches to synchronize their time to a centralized server.
NTP Server Address The IP address of the centralized NTP server. Ethernet connection to
NTP server is required.
DNS Enabled Domain Name Service Enabled or Disabled
Configured Local Hostname The requested hostname for the switch. If a fully qualified domain
name is given, the domain suffix is used as the first suffix in the DNS
search list for DNS lookups performed by the switch.
Assigned Hostname The actual hostname for the switch. If a fully qualified domain name is
given, the domain suffix is used as the first suffix in the DNS search
list for DNS lookups performed by the switch.
IPv6 Assigned Address (1—20) The set of IPv6 addresses assigned by Dynamic Host Configuration
Protocol (DHCP)v6, Neighborhood Discovery Protocol (NDP), or the
switch administrator.
User Login Group
User Name Account name
Login Level Authority level of the user name
Super User Super user privileges Enabled or Disabled.
UserAuthentication Enabled Enforcement of account names and authority (always True)
Firmware Group
Firmware Version Active firmware version
Inactive Firmware Version This field does not apply to this switch
Pending Firmware Version Firmware version that is activated at the next reset
PROM/Flasher Version Installed version of PROM firmware
Services Group
Table 8 Switch data window fields (Continued)
Field Description