Owner manual

HP 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 73
• Configured Zoning—Restores all configured zone sets, zones, and aliases in the switch’s zoning
database, excluding the active zone set.
• Nicknames—Restores the last saved nickname configuration.
• Call Home—Restores all Call Home configuration and profile settings.
5. If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog box
prompts you to activate one of those zone sets. Click Yes, and then select a zone set from the
drop-down list in the Select Zoneset to be Activated dialog box.
6. Click OK and view the results in the top pane of the Restore dialog box.
Restoring the factory default configuration
You can restore the switch and port configuration settings to the factory default values. To restore the
factory configuration on a switch, select Switch > Restore Factory Defaults. The factory default switch
configuration settings are listed in Table 14.
Restoring the switch to the factory default configuration does not restore the account name and password
settings. The most current port license remains in effect. To restore user accounts, you must select the Reset
User Accounts to Default option in the maintenance menu. See “Recovering a Switch” in the HP 8/20q
Fibre Channel Switch Installation and Reference Guide for your switch for information about maintenance
mode and the maintenance menu.
Table 14 Factory default configuration settings
Setting Value
Symbolic Name 8/20q FC Switch
Administrative State Online
Domain ID 1
Domain ID Lock False
In-band Management True
Broadcast Support Enable
Resource Allocation Timeout
(R_A_TOV)
10000 milliseconds
I/O Stream Guard Auto
Device Scan Enabled True
Error Detect Timeout
(E_D_TOV)
2000 milliseconds
SNMP Enabled True
SNMP Proxy True
IP Address 10.0.0.1
FDMI Enabled True
FDMI HBA Entry Level 1000
Subnet Mask Address 255.0.0.0
Gateway Address 10.0.0.254
Network Discovery Static
Remote Logging False
Remote Logging Host IP
Address
10.0.0.254