User Manual

8/20q Fibre Channel Switch QuickTools switch management user guide 81
From Email Address: The e-mail address that will be provided to the SMTP server
to indicate the sender of the e-mail being transmitted. In
e-mails sent by Call Home, this address will appear in the
message heading as the From: address. This value is
required to send e-mails. If there are any problems
encountered in routing the e-mail to any of the intended
recipients, the notice of the problem will be sent to this
address. It is an important address for receiving e-mail
notices concerning problems.
This address is also the default address used when replies
are sent to an e-mail by a recipient. If the Reply-To: Email
address is supplied it will override the sending of replies to
the From: Email address by recipients. However, any
notifications of e-mail problems sent by any SMTP server
used to route the message to the final recipient will always
send those notifications to the From: address.
ReplyTo Email Address: The e-mail address used by mail reading programs to
determine the address that an e-mail should be addressed
to for a reply to a received message. This value will override
the use of the From: address as the recipient for a reply
message.
Throttle Duplicates: This Boolean setting indicates if duplicate messages should
be suppressed and accumulated. If True, then after an
e-mail has been transmitted, Call Home will not transmit
e-mail for switch events that would result in duplicate e-mails
during a specified time window (default is 15 seconds). The
time window can be only be configured using the command
line interface. During this time window, these duplicate
switch events will be accumulated to keep track of how
many have occurred. After the time window has expired, an
e-mail message for the event will be transmitted reporting
the number of duplicate events accumulated and the time of
the last received event. Receiving additional switch events
would result in duplicate e-mail messages being sent.
Table 16 Call Home Setup fields
Field Description