User's Manual

I
-
Using Spectrum Analyzer Features
Saving and Recalling Data from Analyzer Memory
To Recall a State
1. Press [jZ?KQ If CARD is underlined, press INTERNAL CARD to select
INTERNAL.
2. Press INTERNAL + STATE
3. Enter the register number under which the state was saved and the state
is recalled automatically.
State data can also be recalled by using the catalog:
1. Press [RECALL). If CARD is underlined, press INTERNAL CARD to select
INTERNAL.
2. Press Catalog Internal and CATALOG REGISTER. Use the knob
to highlight the number of the state register to be retrieved. The state
registers have a “ST” preceding the register number.
3. Press LOAD FILE .
NOTE
Register 9 is a special register which can aid in recovering from inadvertent loss of line power (power
failure). Press @ZXiJ, INTERNAL 4 STATE, then 9 to place the cable TV analyzer in
the state that existed just prior to the loss of power or set POWER ON LAST to do this automatically
3-9