Maintenance and Service Guide

Table 5-1 Computer Setup—Main (continued)
Option Description
● Network Conguration Settings
● Update System and Supported Device Firmware Using Local Media
Change Date and Time Allows you to set system time and date.
Set Machine Unique Data Lets you update the following values:
● Feature Byte
● Build ID
● Serial Number
● SKU Number
● Product Family
● System Board CT Number
● Product Name
System IDs Lets you set the following values:
● Asset Tracking Number
● Ownership Tag
Replicated Setup Backup current settings to USB device
Saves system conguration to a formatted USB ash media device.
Restore current settings from USB device
Restores system conguration from a USB ash media device.
Save Custom Defaults Saves the current system conguration settings as the custom default set.
Apply Custom Defaults
and Exit
Applies the custom default settings to the computer after rebooting. Does not apply to options in the
Security menu.
Apply Factory Defaults
and Exit
Restores the factory system conguration settings to the computer after rebooting. Does not apply to
options in the Security menu.
Ignore Changes and Exit Exits Computer Setup without applying or saving any changes.
Save Changes and Exit Saves changes to current system conguration, exits Computer Setup, and reboots.
Suppress POST errors Causes error messages not to display during Power-On Self Test.
Computer Setup—Security
NOTE: Support for specic Computer Setup options can vary depending on the hardware conguration.
Table 5-2 Computer Setup—Security
Option Description
Create BIOS
Administrator Password
Lets you set and enable a BIOS administrator password, which controls access to the following features:
● Setup Menu (F10)
● 3rd Party Option ROM Management (F3)
● Update system ROM
Computer Setup (F10) Utilities 63