Using the HP Sure Recover Agent Within a Corporate Firewall HP Sure Recover - Technical white paper

To confirm the activation success, restart the computer, and when the HP logo appears, press F10. Select Advanced, select

HP Sure Recover, select Recovery Agent, and then select URL.

Performing a network recovery

Note

To perform a network recovery, you must be using a wired connection. HP recommends backing up important files, data,

photos, videos, and so on before using HP Sure Recover to avoid loss of data.

1. Connect the client system to the network where the HTTP or FTP distribution point can be accessed.

2. Restart the client system, and when the HP logo appears, press F11.

3. Select Restore from network.

Performing a local drive recovery

If a client system supports Embedded Reimaging and the scheduled image download option is enabled in the applied policy,

then the image is downloaded to the client system at the scheduled time. After the image is downloaded to the client

system, you can restart it to copy the image to the Embedded Reimaging storage device.

To perform local recovery using the image on the Embedded Reimaging storage device:

1. Restart the client system, and when the HP logo appears, press F11.

2. Select Restore from local drive.