HP PC Commercial BIOS (UEFI) Setup

HP PC Commercial BIOS (UEFI) Setup
July 2020
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
13 Appendix B 104
• If the log file cannot be created in the executable folder, it will be created in the first available system temporary folder
location, usually “C:\Users\(username)\AppData\Local\Temp” in Windows.
13.5 Custom Logo Support
NOTE: Operates in Silent Mode only, will not update firmware.
Installation:
• Command Line: HpFirmwareUpdRec.exe -e<logo filename>
• Custom Logo file will be written to BIOS. Check the log file for success or error.
• File must be JPEG format, maximum size 32k (32,768) bytes.
• If BIOS password is set, password file must be provided.
• Command-line option only, silent mode, not shown in usage display. Other options ignored.
• System will not be restarted.
Removal:
• Command Line: HpFirmwareUpdRec.exe -x
• Logo image will be removed from BIOS.
• If BIOS password is set, password file must be provided.
• Command line option only, silent mode, not shown in usage. Other options ignored.
• System will not be restarted.
Table 61 Custom logo support
Return
Code
Name
Description
0
SUCCESS
No error
1
LOAD_ERROR
Error reading image file
2
INVALID_PARAMETER
File name missing
3
UNSUPPORTED
Not supported by BIOS
4
INVALID_FILE
File not found or invalid
26
SECURITY_VIOLATION
BIOS password not provided or incorrect
99
UNKNOWN
Unknown error occurred, see log file