HP PC Commercial BIOS (UEFI) Setup

HP PC Commercial BIOS (UEFI) Setup
July 2020
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
5 Advanced Menu 45
Feature
Type
Description
Default
Notes
 GPS device
Setting
When checked, enables integrated GPS device.
Checked
Notebook Only
 Mobile Network
Device (WWAN)
and GPS Combo
Device
Setting
When checked, enables integrated WWAN / GPS
combo device.
Checked
Notebook Only
 WWAN Quick
Connect
Setting
Maintains power to WWAN device to enable faster
connections.
Checked
Select
products only
 M.2 USB /
Bluetooth
Setting
When checked, enables the USB connection to the M.2
WLAN slot (typically used by Bluetooth if present).
Checked
Desktop Only
HP LAN-Wireless
Protection
Label
 LAN/WLAN Auto
Switching
Setting
When checked, enables automatic switching between
embedded WLAN device and embedded LAN
controller; disables WLAN when LAN connection is
detected.
Unchecked
 LAN/WWAN
Auto Switching
Setting
When checked, enables automatic switching between
embedded WWAN device and embedded LAN
controller; disables WWAN when LAN connection is
detected.
Unchecked
Notebook Only
 Wake on WLAN
Setting
When checked, enables the system to wake via WLAN.
Unchecked
 Wake on
Bluetooth
Setting
When checked, enables the notebook to wake via BT
input devices. Requires Wake on USB to be enabled.
Unchecked
Notebook Only
 Wake on WiGig
Setting
When checked, enables the notebook to wake via
WiGig device.
Unchecked
Notebook Only
 Collaboration
Buttons
Setting
When checked, enables the capacitive controls for
volume and connect or disconnect to function.
Checked
Select
products only
Button Sensitivity
Setting
Controls the touch sensitivity of collaboration buttons.
Possible settings are:
• Low
• Medium
• High
Unchecked
Select
products only
 Hang-up Button
Delay
Setting
When checked, hang-up button must be held at least
0.5 sec before activating.
Unchecked
Select
products only
 NFC
Setting
When checked, enable Near Field Communication
functionality.
Checked
Select
products only
 Wake on LAN in
Battery Mode
Setting
When checked and powered by battery, enables the
notebook to wake via LAN.
Unchecked
Notebook Only
 Fan Always on
while on AC Power
Setting
When checked, leaves the fan on while running on AC
power.
Unchecked
Notebook Only
Increase Idle Fan
Speed (%)
Setting
Controls the minimum fan speed during periods that
the fan would normally be off under the control of the
desktop thermal sensor. Choose a percentage of the
maximum fan speed: 0 –100%.
0
Desktop Only