HP PC Commercial BIOS (UEFI) Setup

HP PC Commercial BIOS (UEFI) Setup
July 2020
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
7 Security Menu (2019 and older) 67
Feature
Type
Description
Default
Notes
 Sure Start Secure
Boot Keys
Protection
Setting
Saves backup copy of Secure Boot Keys so that they can
be recovered if someone attempts to alter them in an
unauthorized manner.
Unchecked
 Enhanced HP
Firmware Runtime
Intrusion Prevention
and Detection
Setting
Monitors key areas of memory for corruption or attack,
notifies user of attack (based on the settings in Sure
Start Security Event Policy), and prevents the attack
from taking place.
NOTE: Only available on certain Intel systems.
Checked
 HP Firmware
Runtime Intrusion
Detection
Setting
Monitors key areas of memory for corruption or attack
and notifies user of attack (based on the settings in Sure
Start Security Event Policy).
NOTE: Only available on certain AMD chipset systems
2016 or later.
Checked
Sure Start Security
Event Policy
Setting
Determines how to respond to a detected event:
• Log the event in the audit log.
• Log the event in the audit log and prompt the
user to acknowledge the event.
• Log the event in the audit log and power off the
system.
Prior to 2016: Not available
Log Event and
notify user
Sure Start Security
Event Boot
Notification
Enable a warning message at boot screen if there is a
Sure Start event (BIOS recovery, Memory intrusion, etc.)
Require
Acknowledgment
7.5 Smart Cover Menu (Desktop Only)
This submenu controls settings for Cover Lock and Cover Sensor.
Table 41 Smart Cover Menu features
Feature
Type
Description
Default
Notes
Cover
Lock
Setting
The Smart Cover Lock is a software-controllable solenoid lock. This lock
restricts unauthorized access to the system’s internal components. The
following settings are possible:
• Lock
• Unlock
Unlock
Desktop
with Cover
Lock
Reboot
Required
Cover
Removal
Sensor
Setting
The Cover Removal Sensor has the following settings:
• Disabled
• Notify the User: Displays warning message on next boot if opened.
• Administrator Password (when password is set): Requires entering
the administrator password before continuing to boot after the cover
is opened.
Disable
Desktop
with Cover
Sensor
Reboot
Required
7.6 Secure Platform Management (SPM)
This submenu controls settings for Secure Platform Management that are used for secure enablement and management of
the HP Sure Run and Sure Recover capabilities.