HP PC Commercial BIOS (UEFI) Setup

HP PC Commercial BIOS (UEFI) Setup
July 2020
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
8 Advanced Menu (2019 and older) 75
Feature
Type
Description
Default
Notes
 Power On
When Lid is
Open
Setting
When checked, the system turns on when the lid opens.
Unchecked
Notebook Only
 Prompt on
Battery Errors
Setting
When checked, the system pauses during system boot to warn
about battery errors.
Checked
Notebook Only
 Audio Alerts
during boot
Setting
When checked, errors trigger audible beeps during POST.
Checked
 Prompt on
Memory Size
Change
Setting
When checked, notify the user during the boot process when a
memory size change has been detected.
Checked
 Prompt on
Fixed Storage
Change
Setting
When checked, notify the user during the boot process when a
fixed storage change has been detected.
NOTE: This feature will not report a change within a RAID
configuration.
Unchecked
Audio Alerts
During Boot
Setting
When checked, errors trigger audible beeps during POST.
Checked
Numlock on at
Boot
Setting
Set the keyboard Num Lock control to be on or off when system is
booted.
Unchecked
 UEFI Boot
Order
When checked, allows the system to boot from UEFI devices.
When Legacy Boot is Disabled, the check boxes for UEFI Boot Order
and Legacy Boot Order will be disabled, because only UEFI devices
can boot in this mode.
When UEFI Boot Order is enabled, the system attempts to boot
from all UEFI devices before any non-UEFI devices.
Arrange the boot order from the UEFI devices found. By default,
the system will arrange the boot order by device type using the
following precedence:
6. USB
7. SATA DVD (Desktop Only)
8. SATA Hard Drives
9. M.2 devices
10. Network Boot
Highlight the list and press Enter to adjust the order of the boot
entries. If a new bootable device is added to the system, it appears
at the bottom of the list, unless it is a USB device that uses the
order of the USB placeholder already in the list.
Checked