System information

Chapter 1
Overview and Common Procedures—Server Upgrade
Removing and Replacing the System Covers
18
a. Align the front edge of the top cover with the alignment mark on the optical drive bay
(Figure 1-4).
Figure 1-4 Top Cover Alignment Mark
b. Place the top cover on the chassis and slide it toward the front of the system until the blue
release lever snaps in place (Figure 1-5).
Figure 1-5 Replacing the Top Cover
Step 2. Replace the plastic side cover:
a. Align the cover’s mounting holes with the matching tabs on the system chassis.
To replace cover,
align front edge here
then slide forward