System information

Chapter 1

Overview and Common Procedures—Server Upgrade

Removing and Replacing the System Covers

Figure 1-13 Fan 3 Removal

Replacing a System Fan

Step 1. Grasp the replacement fan module and insert it into its fan socket.

Step 2. For fans 1A, 1B, or 2, connect the fan power connector.

CAUTION Replace the top cover within 5 minutes to prevent damage to the system components.

Step 3. Replace the top cover. (See “Replacing the Top Cover” on page 21.)

Step 4. Use the PS command of the MP to verify fan operation. (Refer to the Utilities chapter of the

HP 9000 rp3410 and HP 9000 rp3440 Operations Guide for additional information.)

Fan 3