System information

Chapter 1

Overview and Common Procedures—Server Upgrade

Dual Processor Module

Step 5. Unlock the dual processor module locking mechanism using the CPU install tool. Insert the tool

into the hole that runs down through the edge of the heatsink and rotate the special processor tool

180 degrees counterclockwise. Verify that the dual processor module socket locking mechanism is

rotated into the unlocked position (Figure 1-31).

Figure 1-31 Unlocking the Dual Processor Module Locking Mechanism

Step 6. Remove any protective packaging from the processor modules.

NOTE Protective covers may be installed to protect connector pins. These covers should be

installed on processor modules removed for this upgrade.

CPU Install Tool

(2.5 mm Driver/Allen

Wrench)