Manualshelf

System information

ManualsBrandsHP ManualsComputer equipment9000 rp3410
41424344454647484950
Chapter 1
Overview and Common Procedures—Server Upgrade
Dual Processor Module
42
Step 7. Use the four locator posts on the heatsink and the turbo fan power cable to properly align the fan
and module on the system board. The four locator posts will fit in locator holes on the system board
dual processor module mount. The turbo fan power cable must be positioned so that it is located on
the side of the heatsink that faces the front of the system.
Figure 1-32 Aligning the Dual Processor Module