System information

Chapter 1
Overview and Common Procedures—Server Upgrade
Dual Processor Module
43
Step 8. Use the special processor tool to lock the dual processor module in place on the system board. To do
this, insert the special processor tool into the hole that runs down the side of the heatsink and
rotate it clockwise 180 degrees.
Figure 1-33 Locking the Dual Processor Module in Place
Step 9. Slide the sequencing retainer plate toward the back of the system.
Figure 1-34 Slide the Sequencing Retainer Plate
CPU Install Tool
(2.5 mm Driver/Allen
Wrench)