System information

Chapter 1
Overview and Common Procedures—Server Upgrade
Dual Processor Module
44
Step 10. Screw in the four heatsink captive screws in a criss-cross torquing pattern by alternately
tightening the screws so as not to completely tighten one screw before the others (Figure 1-35).
Figure 1-35 Secure the Captive Screws
Step 11. Slide the power module on the system board metal mounting bracket so that the connector on the
power module makes contact with its connector on the dual processor module.
Figure 1-36 Aligning the Processor Module Power Pod
CPU Install Tool
(Torx T15)
Torquing pattern
1
4
3
2