System information

Chapter 3

3 HP 9000 rp3410 1-way Server to HP 9000

rp3410 2-way Server Upgrade Procedure

Processor Upgrade Procedure

To upgrade your HP 9000 rp3410 1-way server to an HP 9000 rp3410 2-way server you need Processor

Upgrade Kit A9770A. This kit contains the following:

•Read me first

• Upgrade key request form

• System upgrade license certificate

• License number label

• Documentation CD

Preparation

You must complete the following preparations one to three days before the upgrade is to take place. This

procedure requires you to obtain information from HP.

Step 1. Verify the contents of the upgrade kit with the packing list. Resolve any discrepancies before

continuing.

Step 2. Locate the system serial number and copy it onto the key request form provided in your upgrade

kit. The system serial number can be found in two places:

• On the left of the front bezel, locate a removable pull tab. A label containing the system serial

number is on the reverse side of the pull tab.

Figure 3-1 HP 9000 rp3410 Server Pull Tab Location

• On the right side of the chassis, as you face the server, locate a label containing the system

serial number.

Pull

Tab