System information

HP 9000 rp3440 1-Way Server to HP 9000 rp3440 2-Way Server Upgrade Procedure

Processor Upgrade Procedure

Chapter 4

Detailed Upgrade Procedure

Upgrade Procedure Overview

1. Back up the system.

2. Shut the system down.

3. Enter the upgrade command.

4. Verify the upgrade.

5. Apply the labels.

6. Boot the server.

Detailed Upgrade Procedure

Step 1. Perform a full system backup.

Step 2. Shut down and reboot the operating system. Example:

shutdown -r 0

NOTE If AUTOBOOT is enabled, the server displays a message indicating:

Autoboot enabled, Hit any key within 10 seconds to interrupt the

boot process

Step 3. Interrupt the boot process.

Step 4. From the firmware Main Menu, select the service menu. Example:

Main Menu: Enter command or menu > ser

---- Service Menu ------------------------------------------------------------

Command Description

------- -----------

CLEARPIM Clear (zero) the contents of PIM

SCSI [option] [<path>] [<val>] Display or set SCSI controller values

MemRead <address> [<len>] Read memory and I/O locations

PDT [CLEAR] Display or clear the PDT

PIM [<proc>] [HPMC|LPMC|TOC] Display PIM information

ProductNum <O|C> [<number>] Display or set Product Number

ScRoll [ON|OFF] Display or change scrolling ability

SELftests [ON|OFF] Enable/disable self test execution