System information

HP 9000 rp3440 1-Way Server to HP 9000 rp3440 2-Way Server Upgrade Procedure

Processor Upgrade Procedure

Chapter 4

NOTE This step must be done for the upgrade to take effect.

Step 7. Verify the upgrade. From the server Main Menu, enter: in pr

Examine the model string value. It should be 9000/800/rp3440 or9000/1000/rp3440.

Example:

NOTE This example was taken from an 800 MHz system. In 1 GHz systems, processor

speed is shown as 1000 MHz.

Main Menu: Enter command or menu > in pr

Model: hp server . (model string 9000/800/rp3440)

PROCESSOR INFORMATION

HVERSION SVERSION Processor

Processor Speed Model Model/Op CVERSION State

--------- -------- -------- -------- -------- -------------

0 800 MHz 0x0889 0x0491 3.0 Active

1 800 MHz 0x0889 0x0491 3.0 Idle

Central Bus Speed (in MHz) : 200

Software ID (dec) : 4471560586272672004

Software ID (hex) : 0x3e0e2ca9706b8904

Software Capability : 0x01f0

Step 8. Apply the label containing the system serial number to the reverse side of the pull tab.

Step 9. Boot the operating system.