hp deskjet 995c and 995ck series printers Bluetooth™ wireless printing ™
contents introducing Bluetooth wireless printing . . . . . . . . . . . . . . . . . . . . 1 printing from a desktop or laptop PC . . . . . . . . . . . . . . . . . . . . . 2 3Com wireless Bluetooth PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3Com wireless Bluetooth USB adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Microsoft Optical Desktop for Bluetooth (HCRP) . . . . . . . . . . . . . . . . . . . . . 7 TDK Bluetooth USB adapter. . . . . . . . . . . . . . . . . . .
notices and acknowledgements hewlett-packard company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett-Packard, except as allowed under copyright laws. acknowledgments Microsoft, MS, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Pentium is a U.S. registered trademark of Intel Corporation. TrueType is a U.S.
introducing Bluetooth wireless printing The HP Deskjet 995c and 995ck series printers support Bluetooth wireless printing. The Bluetooth feature allows you to print without a cable connection between the printer and a Bluetooth wireless technology enabled device.
printing from a desktop or laptop PC In order to use the printer, the PC must be enabled with Bluetooth wireless technology. If your PC has an internal Bluetooth radio, then consult the documentation that came with the PC for information concerning the PC’s Bluetooth wireless feature. If your PC does not have an internal Bluetooth radio, then you must use a Bluetooth PC card or adapter to make the PC Bluetooth wireless technology enabled.
3Com wireless Bluetooth PC card The printing instructions included in this section apply to PCs using a 3Com wireless Bluetooth PC card. requirements Before you can print, you will need a 3Com wireless Bluetooth PC card and a PC. Visit 3Com’s Web site at: www.3com.com. setup and print Follow these steps to set up and print over a Bluetooth wireless connection with the 3Com wireless Bluetooth PC card: 1. Install a 3Com wireless Bluetooth PC card in the PC. 2. Print a file.
printing instructions 1. Open the file you want to print. 2. Select File > Print. The Print dialog box appears. 3. Click Print. The Select Remote Device dialog box appears. 4. Select the printer. The printer is identified by its Bluetooth device name (see page 69). To always use this specific printer, click Always use for this connection. 5. Click the Connect button. When the laptop establishes a Bluetooth wireless connection with the printer, the Bluetooth LED light flashes.
3Com wireless Bluetooth USB adapter The printing instructions included in this section apply to PCs using a 3Com wireless Bluetooth USB adapter. requirements Before you can print, you will need a 3Com wireless Bluetooth USB adapter and a PC. Visit 3Com’s Web site at: www.3com.com. setup and print Follow these steps to set up and print with the 3Com wireless Bluetooth USB adapter over a Bluetooth wireless connection: 1. Install the 3Com wireless Bluetooth USB adapter in the PC. 2. Print a file.
printing instructions 1. Open the file you want to print. 2. Select File > Print. The Print dialog box appears. 3. Click Print. The Select Remote Device dialog box appears. 4. Select the printer. The printer is identified by its Bluetooth device name (see page 69). To always use this specific printer, click Always use for this connection. 5. Click the Connect button. When the laptop establishes a Bluetooth wireless connection with the printer, the Bluetooth LED light flashes.
Microsoft Optical Desktop for Bluetooth (HCRP) The printing instructions included in this section apply to PCs using the Microsoft Optical Desktop for Bluetooth (keyboard, mouse, and dongle) and the Microsoft Windows XP operating system. The Microsoft Optical Desktop for Bluetooth uses Hardcopy Cable Replacement Profile (HCRP) which allows your computer to communicate with the printer as though the computer and the printer were connected by a cable.
install the Microsoft Optical Desktop for Bluetooth For installation instructions, consult the documentation that came with the Microsoft Optical Desktop for Bluetooth. While installing the Microsoft Optical Desktop for Bluetooth, the Windows XP operating system on your computer will be updated with a Microsoft patch to allow HCRP printing.
install the hp deskjet 995c series firmware To install the latest firmware, do the following: 1. Locate the hp deskjet 995c HCRP firmware update on your computer. 2. Double-click the hp deskjet 995c HCRP firmware update file. Run the firmware update from your harddisk drive only. The hp deskjet 995c HRCP firmware update program will not run from CD-ROM. 3. Follow the onscreen instructions to update the firmware on your printer.
connect to the printer with Bluetooth and HCRP To connect the printer to the computer using Bluetooth and HCRP, be sure the Microsoft Optical Desktop for Bluetooth dongle is connected to your computer, and then do the following: 1. Press and hold down the printer’s Cancel (X) button for four seconds to print a Bluetooth Configuration page. The Bluetooth Configuration page contains information that you will use when connecting to the printer. 2.
3. Click the Bluetooth tab. 4. Click the Add button. The Bluetooth Connection Wizard appears.
5. Click Next. The computer searches for any Bluetooth wireless technology enabled devices and displays them in the results list. if this happens... then do this... More than one hp deskjet 995c printer is in the list Find the Device Name on the Bluetooth Configuration page. Match the device name on the Bluetooth Configuration page to one of the device names on the connection wizard. The printer does not appear Click Refresh once. If you still don’t see the printer, see troubleshooting.
6. Select the printer from the list, then click Next. The Authenticate the device? screen appears. 7. Find the Authentication Required line item on the Bluetooth Configuration page, then do one of the following: if the Authentication Required line reads... then... Authentication = 0 Authentication Off Click No, then click Next. Authentication = 1 Authentication On Click Yes, then click Next. You will be prompted for the printer’s PIN Code. Enter the PIN code.
8. Click the Printing (HCRP) check box. 9. Click Next, then click Finish. The hp deskjet 995c series printer icon appears in the list of devices. If you do not see the icon appear in the list, see the troubleshooting entry after HCRP installation the printer icon does not appear in My Printers list. print a file To verify the printer is successfully communicating with the computer: 1. Click Start > Printers and Faxes. 2. Right-click the printer icon, then click Set As Default Printer.
TDK Bluetooth USB adapter The printing instructions included in this section apply to PCs using a TDK Bluetooth USB adapter. The TDK Bluetooth USB adapter uses Hardcopy Cable Replacement Profile (HCRP) to allow your computer to communicate with the printer without a cable. requirements Before you can print, you will need a TDK Bluetooth USB adapter and a PC. Visit TDK’s Web site at: www.tdksystems.com.
connect to the printer with Bluetooth and HCRP The steps for connecting to the printer vary by Windows version. Select the version of Windows running on your computer: • • Windows XP Windows 2000 If you have a HP Deskjet 995C, you must upgrade your printer firmware in order to user the TDK Bluetooth USB Adapter. See the deskjet 995c support website at www.hp.com/support/bluetooth, and then click on drivers and downloads.
Windows XP Before connecting to the printer, the printer software must be installed on the computer. If the printer software is not installed, insert the printer software CD in the computer’s CD-ROM drive and follow the onscreen instructions. To connect the printer to the computer using Bluetooth and HCRP, be sure the TDK USB adapter is connected to your computer, and then do the following: 1. Press and hold down the printer’s Cancel (X) button for four seconds to print a Bluetooth Configuration page. 2.
5. Select the printer, and then click Next. The Bluetooth Security screen appears. 6. Click Skip Pairing. If you do want to enter a PIN Code, the default is 0. You can change the pin code with the configuration utility. The Bluetooth Service Selection screen appears. 7. Select Hardcopy Cable Replacement, and then click Finish. The hp deskjet 995c series Properties dialog box appears. 8. Change the printer name to hp deskjet 995c HCRP, and then click OK. 9. Click OK on the dialog box that appears.
Windows 2000 Before connecting to the printer, the printer software must be installed on the computer. If the printer software is not installed, insert the printer software CD in the computer’s CD-ROM drive and follow the onscreen instructions. To connect the printer to the computer using Bluetooth and HCRP, be sure the TDK USB adapter is connected to your computer, and then do the following: 1. Press and hold down the printer’s Cancel (X) button for four seconds to print a Bluetooth Configuration page. 2.
4. Double-click the printer’s icon. A dialog box asking if you want to install the printer appears. 5. Click Yes. 6. Change the printer name to hp deskjet 995c HCRP, and then click OK. 7. Click OK on the dialog box that appears.
printing instructions 1. Open the file you want to print. 2. Select File > Print. The Print dialog box appears. 3. Select the printer. If two copies of the printer icon appear, select the icon labeled hp deskjet 995c HRCP. When the laptop establishes a Bluetooth wireless connection with the printer, the Bluetooth LED light flashes. After the laptop has sent the file to the printer, the laptop disconnects from the printer, and the Bluetooth LED light stops flashing.
printing from a handheld device Many handheld devices that are enabled with Bluetooth wireless technology are coming onto the market. This document contains instructions for the following: • • • hp Jornada 500 and 700 series Compaq iPAQ Pocket PC Palm handheld m500 series If you are using a Bluetooth handheld device made by another manufacturer, consult the documentation that came with the device or contact the manufacturer for printing instructions.
hp Jornada 500 and 700 series For help printing over a Bluetooth connection with your HP Jornada, select your Jornada model.
hp Jornada 500 series The HP Jornada 500 series PocketPC supports Bluetooth wireless printing: requirements Before you can print, you will need: • • One of the following Bluetooth cards: • A Socket Communications Bluetooth card and software. Visit the Socket Communications Web site at: www.socketcom.com. —or— • An AnyCom, Inc. Bluetooth card and software. Visit the AnyCom Web site at: www.anycom.com. A third-party printing application for the HP Jornada 500 series.
install a Socket or Anycom Bluetooth card Installation instructions may vary by manufacturer. If your Bluetooth card comes with installation instructions, follow the instructions that came with your card. Otherwise, follow the instructions below: 1. Place the Jornada in its cradle. 2. Insert the Bluetooth software CD in the computer’s CD-ROM drive. 3. Follow the onscreen instructions to install the Bluetooth software. 4. After the software has been installed, remove the Jornada from its cradle. 5.
install a third–party printing application Pocket PCs, such as the HP Jornada 500 series, require a third-party printing application, such as PrintPocketCE. PrintPocketCE is available at: www.fieldsoftware.com/PrintPocketCE.htm Instructions for third-party products are provided for informational purposes only. HP does not support these products and cannot guarantee the accuracy of the instructions. Contact the product manufacturer with questions or requests for additional information.
Socket Bluetooth card for hp Jornada 500 series From the Desktop on the Jornada, follow these steps to discover the printer: 1. Tap the Bluetooth icon at the bottom of the screen. 2. Tap Advanced Features > Bluetooth Devices. The Bluetooth Devices screen appears. 3. Tap Tools > Device Discovery. The Bluetooth Device Discovery wizard appears. 4. Tap Next. 5. Tap Any Bluetooth Device, then tap Next. The Jornada searches for any Bluetooth wireless technology enabled devices within range.
AnyCom Bluetooth card for hp Jornada 500 series From the Desktop on the Jornada, follow these steps to discover the printer: 1. Tap Today > Start > Programs > Bluetooth Wizard. The Bluetooth Wizard screen appears. If a Bluetooth Wizard icon does not display in the Start menu, tap File Explorer > My Device > Program Files > [Bluetooth card name] Bluetooth Card > Bluetooth Wizard. 2. Tap Serial Port Connection. 3. Tap Next. 4. Select an available local COM port, then tap Next.
print a file using hp Jornada 500 series third–party applications Printing instructions for the HP Jornada 500 vary according to the third–party printing application used. Consult the documentation that came with the third–party printing application for printing instructions. finding the Bluetooth COM port When you install a Bluetooth card in a Jornada, the Jornada assigns it to one of the available COM ports. Some printing applications may require you to know the COM port for the Bluetooth card.
hp Jornada 700 series The HP Jornada 700 series PocketPC supports Bluetooth wireless printing: requirements Before you can print, you will need a Socket Communications Bluetooth card and software. Visit the Socket Communications Web site at: www.socketcom.com. setup and print Follow these instructions to setup and print with the HP Jornada 700 series: 1. Install a Socket Bluetooth card and software. 2. Discover the printer. 3. Print a file.
install a Socket Bluetooth card Installation instructions may vary by manufacturer. If your Bluetooth card comes with installation instructions, follow the instructions that came with your card. Otherwise, follow the instructions below: 1. Place the Jornada in its cradle. 2. Insert the Bluetooth software CD in the computer’s CD-ROM drive. 3. Follow the onscreen instructions to install the Bluetooth software. 4. After the software has been installed, remove the Jornada from its cradle. 5.
discover the printer From the Desktop on the Jornada, follow these steps to discover the printer: 1. Tap the Bluetooth icon at the bottom of the screen. 2. Tap Advanced Features > Bluetooth Devices. The Bluetooth Devices screen appears. 3. Tap Tools > Device Discovery. The Bluetooth Device Discovery wizard appears. 4. Tap Next. 5. Tap Any Bluetooth Device, then tap Next. The Jornada searches for any Bluetooth wireless technology enabled devices within range.
print a file using hp Jornada 700 series The AnyCom Bluetooth card does not support the HP Jornada 700 series. To print over a Bluetooth wireless connection with an HP Jornada 700 series, use a Socket Communications Bluetooth card. Follow these steps to print over a Bluetooth wireless connection: 1. Insert the Socket Bluetooth card in the Jornada’s expansion slot. 2. Open the file you want to print. 3. Tap File > Print. The Print dialog box appears. 4. Select PCL Inkjet in the Printer menu. 5.
Compaq iPAQ Pocket PC The Compaq iPAQ H3870 supports Bluetooth wireless printing. Compaq iPAQ H3870 printing requirements Before you can print, you will need: • • An H3870 series iPAQ Pocket PC A third-party printing application. Visit the FieldSoftware Products Web site at: www.fieldsoftware.com/PrintPocketCE.
setup and print Follow these instructions to set up and print with the Compaq iPAQ: 1. Install a third-party printing application. 2. Activate the Compaq iPAQ Bluetooth radio. 3. Discover the printer. 4. Print a file. install a third-party printing application The Compaq iPAQ requires a third-party printing application, such as PrintPocketCE. PrintPocketCE is available at: www.fieldsoftware.com/PrintPocketCE.htm Instructions for third-party products are provided for informational purposes only.
activate the Compaq iPAQ Bluetooth radio 1. Tap Start > Today. 2. Tap the Bluetooth icon at the bottom of the screen. 3. Tap Turn radio On. discover the printer Before the Compaq iPAQ can print, it must discover the printer (see Bluetooth discovery on page 68). Follow these steps to discover your printer: 1. Tap Start > Today. 2. Tap the Bluetooth icon at the bottom right of the screen. 3. Tap Bluetooth Manager.
4. Tap Yes to search for devices now. The Compaq iPAQ searches for any Bluetooth wireless technology enabled devices within range. It displays the Bluetooth device name (see page 69) of any device it discovers. 5. Tap the checkbox next to the printer’s Bluetooth device name, then tap Save. If two or more hp deskjet 995c series printers are within range, the screen above shows each of the printer’s Bluetooth device names.
6. Tap either Home or Work, then tap OK. The Bluetooth Manager screen appears again. 7. Tap ok at the top right of the screen to close the Bluetooth Manager. 8. Tap Tools > Settings for All Devices.
9. Tap the Serial Port tab. Note the value in the Outbound COM Port field. You will need this information when printing using third-party applications. In the example below, the Outbound COM Port is COM8. print a file using the Compaq iPAQ third-party applications Printing instructions for the Compaq iPAQ vary according to the third-party printing application used. Consult the documentation that came with the third-party printing application for printing instructions.
4. Select HP PCL from the printer list. 5. Tap the Port list and then tap the printer port (the Outbound COM Port) from step 8 of the previous section. You can also change other print options on this screen by tapping More Settings. 6. Tap Start Printing. 7. Tap another file to print or tap Doc Options > Exit when you are finished.
Palm handheld m500 series The Palm m500 series supports Bluetooth wireless printing. Palm m500 series requirements Before you can print, you will need: • • A Bluetooth Secure Digital Input/Output (SDI/O) expansion card and software. Visit Palm’s Web site at: www.palm.com. (Optional) Documents To Go. Find Documents To Go on the CD that originally came with your Palm handheld or visit the DataViz Web site at: www.dataviz.com.
setup and print Follow these steps to set up and print with a Palm handheld m500: 1. Install a Bluetooth SDI/O expansion card. 2. Print a file. • Print unformatted documents in the Date Book, Address, To Do List, and Memo Pad options using send file. • Print formatted documents in the Date Book, Address, To Do List, Memo Pad, and Mail options using BTPrint. • Print MS Word and MS Excel documents using Documents to Go.
print a file To print a file, use one of the following methods: • • • Send the file BtPrint Documents To Go send file Sending is a Bluetooth wireless communication method that is included as part of Palm OS 4.0. The printed output is unformatted. Follow these steps to send an item to print: 1. Tap the Home icon until the Main Menu appears. 2. Tap one of the following options: • Address • Memo Pad • Date Book • To Do List The screen for the selected program appears. 3. Select an item to print. 4.
BtPrint (optional) BtPrint enhances the formatting for documents printed from the Address, Memo Pad, To Do List, Date Book, and Mail options. install BtPrint Verify that the Palm handheld device cradle is attached to your PC and place the Palm handheld in its cradle. 1. Click the Palm Desktop icon on your PC. 2. Click View > Install > Add. 3. Browse to the CD or folder where your Palm handheld SDI/O Bluetooth software resides. 4. Double-click the Printing folder. 5. Double-click the HP folder. 6.
3. Tap one of the following options: • Date Book • Address • To Do List • Memo Pad • Mail The screen for the selected program appears. 4. Select the category or file you want to print. 5. Tap the Menu icon. 6. Tap BtPrint in the menu. If printing the To Do List, tap Today, Tomorrow, or All to select the records to print. The BtPrint Setup screen appears. If the BtPrint command does not appear in the menu, BtPrint does not support the selected category or view. 7.
choose a default printer (optional) To select the hp deskjet 995c Bluetooth printer as the default printer: 1. Tap BtPrint995c. 2. Tap BTDiscover. The Palm handheld searches for Bluetooth wireless technology enabled printers within 30 feet. 3. Tap Find More. 4. Tap hp deskjet 995c. 5. Tap OK.
Documents To Go (optional) Documents To Go enables you to print MS Word and MS Excel files. It is included on the Palm handheld installation CD in the Bonus Software section. install Documents To Go Install Documents To Go from the CD that originally came with your Palm handheld, or visit the DataViz Web site at www.dataviz.com for more information. print using Documents To Go 1. Tap the Home icon until the All menu appears. 2. Tap the BtPrint995c icon. 3. Tap the DocToPrint icon.
printing from other Bluetooth devices Many Bluetooth wireless technology enabled devices are entering the market. This document contains instructions for the following: • Nokia Series 60 imaging phones As new devices become available, this document will be updated. mobile phones Printing from your mobile phone may be available. Please refer to your mobile phone user documentation for more information.
Nokia Series 60 imaging phones Certain Nokia Series 60 imaging-enabled mobile phones support mobile printing. Please check the following Web sites for more information: • • • Europe and Africa: www.nokia.com Americas: www.nokiausa.com Asia Pacific Region: www.nokia-asia.com If you have technical support inquiries in setting up your phone to print, please contact your mobile phone manufacturer directly.
install the Mobile Printing Application on the phone Follow these steps to install the Mobile Printing Application for Nokia Series 60 imaging phones on the phone: 1. Download the Mobile Printing Application for Nokia Series 60 imaging phones on to a computer from one of these Web sites: • Europe and Africa: www.nokia.com • Americas: www.nokiausa.com • Asia Pacific Region: www.nokia-asia.com The name of the downloaded file is print.sis. 2. Transfer the print.
3. Depending on the method you used to transfer the file to the phone, open the print.sis file.: transfer method opening instructions Email Go to Messaging > Inbox > Mailbox. Retrieve the email, then select Options > Attachments to open the print.sis file. Bluetooth Go to Messaging > Inbox, then select the print.sis file. Infrared Go to Messaging > Inbox, then select the print.sis file. 4. Follow the onscreen instructions to install the application. 5.
print a file Use one of the following methods to print a file: • • Mobile Printing Application Bluetooth Send Mobile Printing Application for Nokia Series 60 imaging phones The following are instructions for printing the following file types using the Mobile Printing Application: • • • • • Image Message Contact Calendar Note Before following these steps, verify that the printer is powered on and idle. If the printer is off or busy, it will not print your file.
printing an image Follow these steps to print an image: 1. Press the Menu key to open the phone’s Main Menu. 2. Scroll to and select the Print icon. 3. Select Images. 4. Select the image(s) you want to print. Selected images have a check next to them. Do not select more than 20 images for a single print job. 5. Select Options > Page Format. 6. Select the image layout: • 1 per page • 2 per page • 6 per page 7. Do one of the following: if the image layout is... then...
printing a message Files received in an unrecognized file type must be saved as an appropriate file type (such as, .jpg or .txt) before it can be printed. Follow these steps to print a message: 1. Press the Menu key to open the phone’s Main Menu. 2. Scroll to and select the Print icon. 3. Select Messaging. 4. Select the folder that contains the message. 5. Scroll to and select the message you want to print. 6. Select Options > Print, then do one of the following: if... then...
printing a contact Follow these steps to print a contact: 1. Press the Menu key to open the phone’s Main Menu. 2. Scroll to and select the Print icon. 3. Select Contacts. 4. Click the box next to the contact you want to print. 5. Select Options > Print, then do one of the following: if... then... More than one printer is discovered Select the appropriate printer. You can identify the printer by its device name.
printing a note Follow these steps to print a note: 1. Press the Menu key to open the phone’s Main Menu. 2. Scroll to and select the Print icon. 3. Select Notes. 4. Select the note you want to print. 5. Select Options > Print, then do one of the following: if... then... More than one printer is discovered Select the appropriate printer. You can identify the printer by its device name. The desired printer is not discovered Select Options > Find Printers, then select the printer.
Bluetooth Send Bluetooth Send is a feature included with your mobile phone. It is not an application developed by HP. Bluetooth Send prints unformatted text and images. For example, Bluetooth Send can only print one calendar item and not a full day. For formatted text and images, use the Mobile Printing Application. Before following these steps, verify that the printer is powered on and idle. If the printer is off or busy, it will not print your file.
troubleshooting This section covers Bluetooth wireless printing only. For other troubleshooting material, see quick help in the HP Printer Assistant.
troubleshooting the printer Bluetooth LED light is flashing or is off This table explains the behavior of the Bluetooth LED light: the Bluetooth LED light is… this means… what you should do… Flashing The printer may be busy receiving data over a Bluetooth wireless connection. While the printer is busy, other devices may not be able to discover it. Wait until the light stops flashing before trying to discover the printer. The printer may be in temporary Public Mode.
printer cannot be discovered Verify the following: • • • The printer is plugged in The Bluetooth LED light is on The Bluetooth LED light is not flashing If each of the above is true, try to discover the printer again. If the printer cannot be discovered, try moving the sending device closer to the printer. If the Bluetooth LED light is off or flashing, see Bluetooth LED light is flashing or is off on page 59.
troubleshooting a connection to a PC more than one hp deskjet 995c is discovered If two or more hp deskjet 995c series printers are within range, the sending device will display multiple hp deskjet 995c printer icons. Each printer icon displays the printer’s Bluetooth device name (see page 69). To find the Bluetooth device name of a specific printer: 1. Press and hold down the Cancel (X) button for 4 seconds to print a Bluetooth Configuration page. 2.
after HCRP installation the printer icon does not appear in My Printers list The printer’s encryption settings may be incorrect if the printer icon does not appear in the My Printers list after you have done the following: • • Installed the printer software Run the Bluetooth Connection Wizard to establish an HCRP connection to the printer Follow these steps to correct the printer’s encryption settings: 1. Press and hold down the Cancel (X) button for 4 seconds to print a Bluetooth Configuration page. 2.
3. Click Start > Control Panel, then do one of the following: Category View Classic View Double-click the Wireless Link icon. Click Printers and other Hardware, then click the Wireless Link icon. 4. Click the Bluetooth tab. 5. Select the printer from the Devices list, then click Remove.
6. Follow the instructions beginning at step 4 on page 11. On the Authenticate the device? screen, do one of the following: if the Encryption Required line reads... Then... Encryption = 0 Encryption Off Click No, then click Next. Encryption = 1 Encryption On Click Yes, then click Next. You will be prompted for the printer’s PIN Code. Enter the PIN code. You can also reset your printer to factory defaults which has encryption/authentication OFF.
print to file error message appears 1. Click Cancel on the Print to File error message, then close all applications. 2. Re-open an appropriate application, then print a document. If the problem persists, follow these steps to locate the COM port number: 1. Click Cancel in the Print to File error message, then close the application. 2. Click Start > Programs > 3Com Mobile > Bluetooth Connection Manager. The Bluetooth Connection Manager opens. 3. Click Tools > Com Port.
If the problem persists, follow these steps: 1. Click Cancel in the Print to File error message, then close the application. 2. Click Start > Programs > Hewlett-Packard > hp deskjet 995c series > hp deskjet 995c series Uninstall. 3. Follow the onscreen instructions. 4. Insert the printer software CD into the computer’s CD-ROM drive, then reinstall the printer software.
about the printer’s Bluetooth wireless feature For information concerning the printer’s Bluetooth wireless feature, select the appropriate topic: • • the printer’s Bluetooth wireless feature changing the printer’s wireless feature 67
the printer’s Bluetooth wireless feature This section explains some basic elements of the printer’s Bluetooth wireless feature. Bluetooth wireless basics ten meters or less Bluetooth wireless technology allows devices, such as printers and laptop computers, to communicate over short distances (10m or less) using radio waves in the 2.4 GHz spectrum. 10m or less To be Bluetooth wireless technology enabled, a device must have a Bluetooth wireless radio module.
Bluetooth configuration page The Bluetooth Configuration page shows information you need when using the printer. To print a Bluetooth Configuration page, press and hold down the Cancel (X) button for 4 seconds.
PIN code When the printer is set to encryption required (see page 71), devices attempting to use the printer are prompted for a PIN code. The default PIN code is 0. You can change the PIN code by using the Configure Wireless Settings dialog box. See change wireless settings on page 73. access modes Access modes determine the level of access that Bluetooth wireless technology enabled devices have to the printer.
• You can put the printer in a temporary Public Mode by pressing and holding down the Power button until the Bluetooth LED light flashes. The printer returns to Private Mode after 1 minute. encryption required The printer can be set to require encryption when it receives data over a Bluetooth wireless connection. When the Ecryption Required option is selected, the printer requires that: • • All data sent over a Bluetooth wireless connection is encrypted.
changing the printer’s wireless feature USB cable and printer driver required To change the printer’s wireless settings, you must have the following: • • A PC that is connected to the printer with a USB cable A printer driver that has been installed to a USB port A USB cable is not required for Bluetooth printing. install USB driver Follow these steps to install a USB printer driver: 1. Insert the printer software CD into the computer’s CD-ROM drive. 2. Follow the onscreen instructions.
change wireless settings In order to change the printer’s wireless settings you must connect the printer to your computer with a USB cable. 1. Click Start > Programs > Hewlett-Packard > hp deskjet 995c series > hp deskjet 995c series Toolbox. The HP Toolbox appears. 2. In the drop-down menu, select the hp desket 995c series driver. The correct driver begins with USB. 1.
3. Click the Configuration tab. The configuration panel appears. 4. Click Wireless, then click Configure Wireless Settings. The Configure Wireless Setting button appears. If the button is not active, then click the Device Services tab and repeat steps 2–4. 5. Click the Configure Wireless Settings button. The Configure Wireless Settings dialog box appears.
6. Select the Bluetooth wireless options that you want. For a description of the Configure Wireless Setting dialog box, see the configure wireless settings dialog box. 7. After you have selected the options you want, click OK. A warning dialog box appears. 8. Click OK to close the warning dialog box. 9. On the Toolbox, click the Device Services tab, then select the hp deskjet 995c series Bluetooth driver in the pull-down menu. 10.
4. Reset Device Access: Click for reset device access (see page 77) from the printer’s memory. 5. Mode: Set the following options: • Private mode: The printer can be discovered only by devices that have stored its address. See private mode on page 70. • Public mode: The printer can be discovered by all Bluetooth wireless technology enabled devices. See public mode on page 70. • Turn off Bluetooth: Disable Bluetooth wireless printing.
3. Click the Change PIN Code button. The Change PIN Code dialog box appears. 4. Enter the new PIN Code. The default PIN Code is 0. 5. Re-enter the new PIN code. 6. Click OK. The PIN code is changed. reset device access In order to change the printer’s wireless settings you must connect the printer to your computer with a USB cable. Follow these steps to clear all bonded devices from the printer’s memory: 1. Open the Toolbox, then open the Configure Wireless Settings dialog box. 2.
index D discovery 68 Documents To Go® 41 DocumentsToPrint print instructions 47 Numerics 3Com Bluetooth USB adapter printing instructions 5 3Com wireless Bluetooth PC card printing instructions 3 3Com wireless Bluetooth USB adapter printing instructions 5 E encryption required 71 F formatted documents 42 A access modes 70 encryption required 71 private mode 70 public mode 70 H HotSync® 42 HP Mobile Printing Application installing 50 using 52 B Bluetooth configuration 72 changing 73 Bluetooth configur
print instructions BtPrint 44 DocumentsToPrint 47 printing instructions 41, 49 PIN code 70 changing 76 print Compaq iPAQ H3870 39 Jornada 500 series 29 Jornada 700 series 33 Jornada 720 33 Palm BtPrint 44, 47 print to file error 65 printer Bluetooth configuration 72 changing 73 configuration configure wireless settings dialog box 75 reset access 77 printing 3Com Bluetooth USB adapter 5 3Com wireless Bluetooth PC card 3 3Com wireless Bluetooth USB adapter 5 Palm 41, 49 TDK Bluetooth USB adapter 15 private mo