Daim Ntawv Qhia Tus Neeg Siv

c. Hard drive (see Hard drive on page 31).
d. Solid-state drive (see SSD (M.2) on page 33).
e. Memory (see Memory on page 34).
f. WLAN module (see WLAN module on page 37).
g. Fan (see Fan on page 41).
h. Heat sink (see Heat sink on page 43).
i. I/O board (see I/O board on page 45).
j. Power button board Power button board on page 46).
Remove the system board:
1. Disconnect the following zero-insertion force (ZIF) connectors from the system board:.
●
Speaker cable (1)
●
Display cable (2)
●
Battery cable (3)
●
Power button board connector (4)
●
Power button board cable (5)
●
I/O board cable (6)
●
I/O board connector (7)
●
TouchPad cable (8)
●
Keyboard cable (9)
●
Solid-state drive cable (10)
●
Hard drive cable (11)
●
SD card reader cable (12)
Component replacement procedures 49