Maintenance and Service Guide: 8200 Elite Series Convertible Minitower, 8200 Elite Series Microtower, 8200 Elite Series Convertible Small Form Factor, 8200 Elite Series Convertible Ultra-slim Desktop, 6200 Pro Series Microtower

Speaker
Description Spare part number
Speaker 647447-001
The speaker is secured to the front of the chassis between the fan and the I/O ports.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 206).
2. Remove the computer access panel (
Access Panel on page 207).
3. Remove the front bezel (
Front Bezel on page 208).
4. Disconnect the speaker cable from the white system board connector labeled SPKR.
5. On the outside of the chassis, remove the two Torx T8 screws that secure the speaker to the
chassis (1), and then from the inside of the chassis, slide the speaker up to remove it (2).
Figure 9-22 Removing the speaker
To install the speaker, reverse the removal procedure.
226 Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis