HP Business Notebook Intel® vProTM setup and configuration 2011 Business Notebook Models - Technical white paper

12
This option will determine if the local MEBx password can be modified from a remote
console.
Option
Effect
Default Password Only
This option will allow the MEBx password to be remotely
modified only if it is the default “admin” password.
During Setup and
Configuration
This option will allow the MEBx password to be remotely
modified only during setup and configuration of the AMT
platform.
Anytime
This option will allow the MEBx password to be remotely
modified at any time.
10. Go into Network Setup & select Host Name.
a. Enter a host name
Default Setting : None
Recommended Setting : User Dependent
Spaces are not accepted in the host name.
11. Go into Network Setup and select TCP/IP.
a. Wired LAN IPV4 Configuration
i. DHCP Mode
Default Setting : DHCP Enabled
Recommended Setting : User Dependent
Select Enabled.
For the purpose of this whitepaper, DHCP is enabled.
b. Wired LAN IPV6 Configuration
Select Enabled option for IPV6 Feature Selection
i. IPV6 Interface ID Type.
Default Setting : Random ID
Recommended Setting : Random ID
ii. IPV6 Address.
Enter a static IPV6 address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
iii. IPV6 default Router.
Enter the IPV6 Default Router address
Default Setting : None
Recommended Setting : Network Dependent
Example: 2001:db8::1428:57ab
iv. Preferred DNS IPV6 Address