HP Business Notebook Intel® vProTM setup and configuration 2011 Business Notebook Models - Technical white paper

7
Select Default Password Only. This option determines when the user is allowed to change the Intel
MEBX password through the network. The Intel MEBX password can always be changed via the
Intel MEBX user interface.
Default Password Only – The Intel MEBX password can be changed through the network
interface if the default password has not been changed yet.
During Setup and Configuration – The Intel MEBX password can be changed through
the network interface during the setup and configuration process but at no other time. Once
the setup and configuration process is complete, the Intel MEBX password cannot be changed
via the network interface.
Anytime – The Intel MEBX password can be changed through the network interface at any
time
14. Network Setup.
Intel ME Network Name Settings
a. Host Name
Enter a Host Name
Default Setting : None
Recommended Setting : User Dependent
Note that spaces are not accepted in the host name. Make sure there is not a duplicate
host name on the network. Hostnames can be used in place of the system’s IP for any
applications requiring the IP address.
b. Domain Name
Enter a domain name
Default Setting : None
Recommended Setting : Network Dependent
The domain name is blank by default. If it is not populated, then the default domain of
“Provisionserver” will be used when connecting to a Setup and Configuration Server. If
the name of the S&CS is not “Provisionserver” and the domain name is blank, then an
alias must be set up in the DHCP server to redirect the connection for “Provisionserver” to
the proper S&CS domain name. If the domain name field is populated, then that will be
the domain used. However, if there is no response after four DNS queries to the named
domain, then that domain name will no longer be used and the default “Provisionserver”
will be used.
c. Subnet Mask Address
Share/Dedicated FQDN
Default: Setting: Shared
Recommended Setting: Shared
This setting determines whether the Intel ME Fully Qualified Domain Name (FQDN) (i.e.
the "HostName. DomainName") is shared with the host and identical to the operating
system machine name or dedicated to the Intel ME.
d. Dynamic DNS Update
Default: Setting: Disabled
Recommended Setting: Disabled