HP Color LaserJet Enterprise M855 and Flow MFP M880 - Hole Punch Kit Installation Guide

10
13
14
15
1
4
5
2
3
16
1
ON
234
17
Set the sensor adjustment values.
Follow the steps below to adjust the sensors on the punch
controller PCA.
Make sure that the product power is o.
Locate the switches and LEDs on the punch controller PCA.
• SW601 (callout 1)
• LED602 (callout 2)
• LED601 (callout 3)
• SW602 (callout 4)
• SW603 (callout 5)
NOTE: SW601 has four electronic switches that can be congure
in the ON or OFF position. The punch controller PCA is marked ON
and OFF to show the current switch position.
Set SW601 to the settings above.
Turn the product power on.