HP LaserJet Enterprise M806, HP LaserJet Enterprise flow MFP M830, HP Color LaserJet Enterprise M855, and HP Color LaserJet Enterprise flow MFP M880 finishing accessories and paper handling - User Guide

Hole punch when copying from the Automatic Document Feeder
(ADF) optional accessory
Use these steps to configure the default settings for punching holes in when making copies at the product.
1. On the product control panel Home screen, touch Copy.
2. In the Copy screen, scroll to and touch Hole Punch, and select the position and number of holes to
punch. The following options are available:
●
None
●
Two left or top
●
Two left
●
Two right
●
Two top
●
Two bottom
●
Three left or top
●
Three left
●
Three right
●
Three top
●
Four left or top
●
Four left
●
Four right
●
Four top
3. Touch OK.
4. From the Copy screen, enter the number of needed copies in the Copies box.
5. Touch Copy to complete the job.
ENWW Hole punch when copying from the Automatic Document Feeder (ADF) optional accessory 119