HP LaserJet Enterprise M806, HP LaserJet Enterprise flow MFP M830, HP Color LaserJet Enterprise M855, and HP Color LaserJet Enterprise flow MFP M880 finishing accessories and paper handling - User Guide

Aa
123
◦
Landscape document orientation
Aa
123
●
Finishing: staple, hole punch, or both
Some output device options are not supported and are indicated as such in the device output options tables.
Some drivers will not allow these supported choices to be selected in the driver. For options that are not
supported, the job will print but no output paper handling, such as hole punch or staple, will be performed.
NOTE: The following tables are examples of supported features.
Staple only output options
1 Staple
The following staple option tables by paper size for the HP LaserJet Enterprise M806 and HP LaserJet
Enterprise flow MFP M830 applies to these devices:
●
HP Stapler/Stacker — Mailbox Mode — CZ994A
●
HP Stapler/Stacker — Stacker Mode — CZ994A
●
HP Stapler/Stacker — with 2/3 Hole Puncher — Mailbox Mode — CZ995A
●
HP Stapler/Stacker — with 2/3 Hole Puncher — Stacker Mode — CZ995A
●
HP Stapler/Stacker — with 2/4 Hole Puncher — Mailbox Mode — CZ996A
●
HP Stapler/Stacker — with 2/4 Hole Puncher — Stacker Mode — CZ996A
●
HP Booklet Maker/Finisher — Mailbox Mode — CZ285A
●
HP Booklet Maker/Finisher — Stacker Mode — CZ285A
The following staple option tables by paper size for the HP Color LaserJet Enterprise M855 and HP Color
LaserJet Enterprise flow MFP M880 applies to these devices:
126 Chapter 5 How to use the staple/collate feature (optional finishing accessory) ENWW