HP LaserJet Enterprise M806, HP LaserJet Enterprise flow MFP M830, HP Color LaserJet Enterprise M855, and HP Color LaserJet Enterprise flow MFP M880 finishing accessories and paper handling - User Guide

4. If you are installing an optional stapler/stacker, remove the intermediate paper transport unit (IPTU)
and the binder cover from the packaging.
NOTE: If you are replacing an existing stapler/stacker, these parts are already installed on the product
and replacement of them is not required.
Step three: Install the optional or replacement stapler/stacker
1. If not already done, turn off the product and disconnect the power cord.
CAUTION: To avoid damage to the product, turn the product off, wait five seconds, and then remove
the power cord before attempting to service the product.
a. Remove two thumbscrews.
60 Chapter 2 Install and configure the finishing accessories ENWW