HP LaserJet Enterprise M806, M830, M855, M880 - PJL commands used for stapling or hole punching (white paper)

Metric format (two or four holes)
Description
stapling_option
punch_option
One Staple in the Top left corner with Two Holes (always
staple in the top left and punch along the top side or along
the left side)
ONE_STAPLE
2HOLE or
2PT_DIN
One Staple in the Top Left corner with Two Holes along the
Left side (if not possible, no stapling + punching is done)
LEFT_1PT or
LEFT_1PT_ANGLED
LEFT_2PT_DIN
One Staple in the Top Right corner with Two Holes along the
Right side (if not possible, no stapling + punching is done)
RIGHT_1PT or
RIGHT_1PT_ANGLED
RIGHT_2PT_DIN
One Staple in the Top Left corner with Two Holes along the
Top side (if not possible, no stapling + punching is done)
LEFT_1PT or
LEFT_1PT_ANGLED
TOP_2PT_DIN
One Staple in the Top Right corner with Two Holes along the
Top side (if not possible, no stapling + punching is done)
RIGHT_1PT or
RIGHT_1PT_ANGLED
TOP_2PT_DIN
One Staple in the Top left corner with Four Holes (always
staple in the top left and punch along the top side or along
the left side)
ONE_STAPLE
4HOLE or
4PT_DIN
One Staple in the Top Left corner with Four Holes along the
Left side (if not possible, no stapling + punching is done)
LEFT_1PT or
LEFT_1PT_ANGLED
LEFT_4PT_DIN
One Staple in the Top Right corner with Four Holes along the
Right side (if not possible, no stapling + punching is done)
RIGHT_1PT or
RIGHT_1PT_ANGLED
RIGHT_4PT_DIN
One Staple in the Top Left corner with Four Holes along the
Top side (if not possible, no stapling + punching is done)
LEFT_1PT or
LEFT_1PT_ANGLED
TOP_4PT_DIN
One Staple in the Top Right corner with Four Holes along the
Top side (if not possible, no stapling + punching is done)
RIGHT_1PT or
RIGHT_1PT_ANGLED
TOP_4PT_DIN
Destination
@PJL SET PROCESSINGBOUNDARY=MOPY
@PJL SET PROCESSINGACTION=APPEND
@PJL SET OUTBIN=OPTIONALOUTBIN1
OR
@PJL SET PROCESSINGBOUNDARY=MOPY
@PJL SET PROCESSINGACTION=APPEND
@PJL SET OUTBIN=OPTIONALOUTBIN2