User's Manual

For further information, refer to ‘‘The Numeric Hotkeys’’ on page 3-13.
SNMP Default Settings
If the minimal configuration a remote router receives from Quick
Remote in a central router includes the DoD Internet Router (IP)
service, then SNMP will be enabled in the remote router as follows:
Community Name: Public
Session Mode: Read (read-only access)
Session Type: Regular
Node Address: 0.0.0.0 (permits any network entity using Community
Name to query the agent)
For more on SNMP parameters, refer to the Operator’s Reference.
Quick Remote
8
How To Use Quick Remote
Operating Notes
8-15