User's Manual

Save configuration and exit Quick Configuration
(y/n?)
5. Type y and press [Return] to display the ‘‘reboot’’ prompt
Reboot now (y/n?)
6. Type y (for ‘‘yes’’) and press [Return].
While the router is rebooting, the console displays
REBOOTING THE SYSTEM
When you see the message
Waiting for speed sense
the router has finished rebooting. Any configuration changes you
made prior to exiting and rebooting will be implemented in the
router configuration.
7. Press [Return] to return to the Main menu.
To configure additional (non-minimal) X.25 parameters:
As you may have noticed in the procedure to configure for minimal X.25
operation (page 3-18), the ‘‘l’’ and ‘‘r’’ hotkeys give you access to several
parameters other than those needed for minimal X.25 operation. Also,
there are other hot keys that give you access to additional parameters
that you may want to view and change. Thus, after you specify X.25
service and the circuit type (DDN, PDN, or PTOP), you can use the
hotkeys to access, view, and change the current settings of all X.25 (or
other) parameters if you find it necessary to do so.
1. Highlight the X.25 circuit type for the desired port. For example:
Quick
Configuration
3
How To Use Quick Configuration
How To Configure for X.25
3-23