User's Manual

3. Continuing from the above example, the Quick Configuration screen
would show the WAN interface module moved to slot 4 and the
Ethernet interface module installed in slot 2.
Neither module is configured because:
– The WAN interface module configuration that was in slot 2
was in conflict with the Ethernet interface module and was
therefore deleted (step 1b), leaving slot 2 without any inter-
face module configuration.
– Slot 4 had no interface module configuration, and was there-
fore unaffected by moving the WAN interface module to that
slot.
4. In this example, to resume routing operations, it is necessary to
configure one or more ports on either module and reboot the router.
Figure 3-26. Quick Configuration Showing Unconfigured Interface Modules
How To Use Quick Configuration
Operating Notes
3-38