User's Manual

How To Disconnect Telnet Access to Another HP Router
To disconnect from a remote HP router, return to the Main menu in the
remote router and select “Logout” from the Main menu. When you see
the following prompt:
Do you want to disconnect? [Y/N:]
press [Y] for ‘‘yes’’. You will then see:
Hit <Return>
Press [Return]. The remote node and Telnet are disconnected, and you will
see your own system name on the the display.
If the remote system is not another HP router, then type the appropriate
commands to interact with that system. Disconnect Telnet when you are
finished. When Telnet is disconnected, you will see your own system
name on the display.
How To Use the Network Control Language (NCL) Commands To Manage a Router
How To Use Telnet To Establish a Virtual Terminal Connection to a Remote Node
7-12